Tag: M.W:200-300

92-39-7,Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2-Chloro-10H-phenothiazine,92-39-7, This compound has unique chemical properties. The synthetic route is as follows.

Step: Step 1, the reaction system azeotropic water removal: To the reaction kettle with argon gas was added 50 kg of N-methylpyrrolidone at room temperature, 2-chlorophenothiazine 50 kg, cuprous cyanide 23 kg, lithium iodide 0.23 kg, potassium iodide 3.55 kg and cyclohexane 25 kg, Stirring up to 85C , boiling a total of boiling water, about 40min, measured water 0.04wt.% (Moisture ? 0.05wt.%). Step 2: Preparation of 2-cyanophenothiazine by refluxing reaction: The reaction system after the removal of water continued to warm to 112 C, Atmospheric distillation distillation system in the cyclohexane, cyclohexane can be recycled recycling, Continue to heat up to the reflux state (T = 218 ), insulation reaction 10h, To obtain a reaction product; Step 3, the reaction product after treatment and extraction: After the reaction, the temperature was lowered to 75 C, To the reaction system was added sodium thiosulfate solution (sodium thiosulfate 33 kg and water 250 kg mixed dissolved) Stirring for 2h, cooling to 5 , filtering, the first filter cake and the first filtrate, The first filter cake was dried at 90 C to a moisture content of ? 4 wt.%. The first filter cake was extracted with acetone, The dried cake and acetone 700L, heated to reflux 30min, down to 50 , The second filter cake and the second filtrate were filtered and the second filtrate was concentrated at atmospheric pressure to give 500 L of acetone to give a concentrate, The concentrated liquid for low temperature precipitation, the specific process is to concentrate the solution to 0 , filtration, Dried 2-cyanophenothiazine crude 45kg, 98% purity, amide impurity 0.9%.Step 4: Purification of crude 2-cyanophenothiazine: 2-cyanophenothiazine crude 45kg and acetone 36kg heated to reflux, reflux insulation 30min. Cooled to 0 C, filtered and dried to give 4-cyano phenothiazine 43.2 kg, purity ?99% Amide impurities ? 0.1%, yield: 90.0%This example gives an industrial preparation method of an environment-friendly 2-cyanophenothiazine, The method of other processes and implementation Example 1 is the same, the difference is only: In the third step, the mass of the dried first filter cake and the ratio of the second organic solvent acetone used in the first filter cake Was adjusted to 1:15 from 1: 8 of Example 1. The yield of 2-cyanophenothiazine was 90.2% based on 2-chlorophenothiazine

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 92-39-7.

Reference£º
Patent; Xi’an Caijing Optoelectric Technology Co., Ltd.; Gao Aiai; Zhao Qunxing; Zhou Bugao; Fan Jia; Bie Guojun; Yan Xiaoliang; Lan Aihu; Guo Chuang; Li Jian; Xu Lei; Zhang Weijie; Wang Li; (11 pag.)CN106946811; (2017); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

92-30-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, it is a common compound, a new synthetic route is introduced below.

After dissolving 2-(trifluoromethyl)-10H-phenothiazine (2.0 g, 7.48 mmol) in N,N-dimethylformamide (2 mL), 60% sodium hydride (149.70 mg, 3.74 mmol) and 1-bromo-4-chlorobutane (1.16 mL, 10.10 mmol) were added at 0 C. The reactants were heated at 100 C. for 12 hours under reflux. After the reaction was completed, the reaction solution was extracted with ethyl acetate and the organic layer was dried with magnesium sulfate, filtered under reduced pressure and then concentrated under reduced pressure. The target compound (1.52 g) was obtained with a yield of 56.72% by separating the residue by chromatography (ethyl acetate/n-hexane=1/20). 1H NMR (400 MHz, CDCl3): delta 1.89-2.00 (4H, m, 2CH2), 3.40 (1H, t, J=6.02 Hz, CH), 3.54 (1H, t, 6.18 Hz, CH), 3.94 (2H, t, 6.02 Hz, CH2), 6.89 (1H, d, J=8.12 Hz, CH), 6.96 (1H, t, 7.44 Hz, CH) 7.03 (1H, s, CH), 7.13-7.17 (2H, m, 2CH), 7.21 (2H, t, 8.16 Hz, 2CH).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 92-30-8, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; Korea Institute of Science and Technology; Roh, Eun Joo; Jeon, Bo Ra Mi; Lee, Chang Joon; Hong, Jin Pyo; Jeong, Joo Yeon; Kang, Sang Soo; (28 pag.)US10035795; (2018); B1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 3939-23-9,3-Bromo-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 3939-23-9

Step 2, 132 mmol of 9-BBN was dissolved in THF at 0 C, 44 mmol of 1-2, Stirring for 15min, warming to 35 degrees Celsius, reaction 3h, and then transferred to the mixture containing 5-1 66mmoltetrakis(triphenylphosphine)palladium 0.88 mmol, sodium carbonate 132 mmol in toluene: ethanol: water = 4: 1: 1, and the temperature was raised to reflux temperature reaction24h. The crude product was passed through a silica gel column to give the product 20 mmol, 5-2.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,3-Bromo-10H-phenothiazine,3939-23-9,its application will become more common.

Reference£º
Patent; Changchun Hai Purunsi Technology Co., Ltd.; Sun Keyi; Cai Hui; (31 pag.)CN106946934; (2017); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2-(Trifluoromethyl)-10H-phenothiazine,92-30-8, This compound has unique chemical properties. The synthetic route is as follows.,92-30-8

General procedure: Formyl chloride derivatives (7 mmol) was added to the solution ofvarious arylamines (7 mmol) in acetone (25 ml). After stirring at 60 Cfor 6 h, the reaction mixture was concentrated to remove acetone. Theresidue was purified by column chromatography with petroleum/ethylacetate (9:1) to afford the target compound 15-27 and 29-32.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 92-30-8.

Reference£º
Article; Fu, Dong-Jun; Li, Miaomiao; Zhang, Sai-Yang; Li, Jiang-Feng; Sha, Beibei; Wang, Longhao; Zhang, Yan-Bing; Chen, Ping; Hu, Tao; Bioorganic Chemistry; vol. 92; (2019);,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 98827-44-2,Methyl 4-hydroxy-2H-thieno[2,3-e][1,2]thiazine-3-carboxylate 1,1-dioxide, as follows.98827-44-2

98827-44-2, EXAMPLE 6 A solution of 4-hydroxy-3-methoxycarbonyl-2H-thieno-[2,3-e]-1,2-thiazine 1,1-dioxide (0.7 g) and 2-aminotropone (0.341 g) in xylene (7 ml) was refluxed for 21 hours and the reaction mixture was allowed to stand at ambient temperature. The crystalline precipitates were collected by filtration, washed with toluene and recrystallized from tetrahydrofuran to give 4-hydroxy-N-(1-oxo-2,4,6cycloheptatrien-2-yl)-2H-thieno[2,3-e]-1,2-thiazine-3-carboxamide 1,1-dioxide (0.47 g). mp: 230 C. (dec.). IR (Nujol): 3260, 1550, 1500, 1450, 1400, 1340, 1180 cm-1 NMR (DMSO-d6, delta): 7.00-7.47 (5H, m), 7.57 (1H, d, J=5 Hz), 8.17 (1H, d, J=5 Hz), 8.89 (1H, d, J=9 Hz), 10.53 (1H, brs).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 98827-44-2, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Fujisawa Pharmaceutical Co., Ltd.; US4563453; (1986); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

3939-23-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.3939-23-9,3-Bromo-10H-phenothiazine, it is a common compound, a new synthetic route is introduced below.

Step 2, 132 mmol of 9-BBN was dissolved in THF at 0 C, 44 mmol of 1-2, Stirring for 15min, warming to 35 degrees Celsius, reaction 3h, and then transferred to the mixture containing 5-1 66mmoltetrakis(triphenylphosphine)palladium 0.88 mmol, sodium carbonate 132 mmol in toluene: ethanol: water = 4: 1: 1, and the temperature was raised to reflux temperature reaction24h. The crude product was passed through a silica gel column to give the product 20 mmol, 5-2.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 3939-23-9, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; Changchun Hai Purunsi Technology Co., Ltd.; Sun Keyi; Cai Hui; (31 pag.)CN106946934; (2017); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Adding a certain compound to certain chemical reactions, such as: 188614-01-9,Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 188614-01-9,188614-01-9

Step 1. Borane-tetrahydrofuran complex solution (1 M in tetrahydrofuran, 45 mL, 45 mmol) was added at 0 C. to a suspension of methyl-3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate (2.00 g, 8.96 mmol) in tetrahydrofuran (20 mL). The ice bath was removed, the homogenous solution stirred at room temperature for 2 h, then excess reagent was destroyed by careful addition of methanol (42 mL) at 0 C. After evaporation of volatile material, the residue was taken up in 5% methanolic sulfuric acid solution (25 mL) and the solution was heated at reflux over 80 min. After cooling, the reaction mixture was partitioned between ethyl acetate and water, the organic layer was dried (MgSO4) and evaporated to produce 3,4-dihydro-2H-benzo[1,4]thiazine-6-carboxylic acid methyl ester (1.79 g, 96%). Light yellow solid, MS (ISP)=210.1 (M+H)+.

According to the analysis of related databases, 188614-01-9, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; Ackermann, Jean; Bleicher, Konrad; Ceccarelli, Simona M.; Chomienne, Odile; Mattei, Patrizio; Sander, Ulrike Obst; US2007/191603; (2007); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

92-39-7,Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2-Chloro-10H-phenothiazine,92-39-7, This compound has unique chemical properties. The synthetic route is as follows.

(1) Dehydration reaction: 2-chlorophenothiazine, cuprous cyanide, catalyst, quinoline, p-toluenesulfonyl chloride according to moleThe ratio is 1:1.25:0.15:5:0.1 is added to the reactor, and the temperature is raised to 120 C for dehydration reaction, the reaction is 1 hour, and the water is dehydrated to a moisture content of less than 0.1%;The catalyst is a mixture of sodium iodide and lithium iodide, and the molar ratio of sodium iodide to lithium iodide is 1:0.3;(2) Preparation of crude 2-cyanophenothiazine: the temperature of the reactor was raised to 230 C, and the reaction was carried out for 15 hours;(3) Separation of crude 2-cyanophenothiazine: the reactor temperature was lowered to 90 C, and 8 times was added to the reactor.The total amount of moles of the starting material is water, the solid is precipitated and filtered, and the product is extracted with ethyl acetate and concentrated to dryness to give a crude 2-cyanophenothiazine;(4) Purification of 2-cyanophenothiazine: a crude 2-cyanophenothiazine is placed in a mixed solvent of toluene and methanol,The volume ratio of toluene to methanol in the mixed solvent was 1:0.15, the temperature was raised to 120 C for 30 minutes, and the mixture was cooled to 20 C, and the precipitated solid was filtered to obtain 2-cyanophenothiazine.After testing, the yield of 2-cyanophenothiazine prepared in this example was 92.6%, and the purity of the product was 99.61%.The content of the amide was 0.03%.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 92-39-7.

Reference£º
Patent; Ningbo Jinuo Chemicals Co., Ltd.; Peng Zhigang; Yue Mingxin; Qu Qiangzheng; (8 pag.)CN105175355; (2018); B;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

92-30-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, it is a common compound, a new synthetic route is introduced below.

Compound 13; 10-[3-(N-Boc-4-piperidyl)propyl]-2-trifluoromethylphenothiazine; To a stirred solution of 2-trifluoromethylphenothizine 1 (400 mg, 1.5 mmol), sodium hydride (100 mg, 2 mmol) in DME (10 mL) at 90 C was added N- Boc-4-(3-bromopropyl)piperidine 12 (380 mg, 1.24 mmol) dropwise under an atmosphere of argon. The reaction mixture was stirred for 12h at reflux. The reaction mixture was filtered and the filtrate was concentrated under vacuum. The residue was partitioned between ethyl acetate (25 mL) and brine (1OmL). The organic layer was dried over anhydrous sodium sulphate, filtered, and evaporated. The resulting residue was purified by silica gel column chromatography (8:2 hexane : ethyl acetate) on silica gel to give phenothiazine derivative 13 (425 mg, 70percent) as a solid. MS(ESI): m/z493 (M+H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 2-(Trifluoromethyl)-10H-phenothiazine reaction routes.

Reference£º
Patent; IMMUNE CONTROL, INC.; WO2008/27521; (2008); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

92-30-8,Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials.92-30-8,A new synthetic method of this compound is introduced below.

General procedure: A stirred mixture of phenothiazine (100 mg, 0.5 mmol),3,5-dimethylphenol (183 mg, 1.5 mmol), and K2CO3 (69 mg,0.5 mmol) in ODCB (1.5 mL) was heated to 130 oC for 6 h under O2 balloon atmosphere. After the usual aqueous extractive workup and column chromatographic purification process (hexanes/EtOAc, 20:1) para-3a (103 mg, 64%) and ortho-3a (34 mg, 21%) were obtained as white solids. Other compounds were synthesized similarly, and the spectroscopic data of 3a-3m and the sulfoxide of 3g are as follows.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 2-(Trifluoromethyl)-10H-phenothiazine.

Reference£º
Article; Yu, Jin; Moon, Hye Ran; Kim, Su Yeon; Kim, Jae Nyoung; Bulletin of the Korean Chemical Society; vol. 36; 11; (2015); p. 2765 – 2768;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem