Tag: M.W:200-300

1910-85-6, Name is 1-Chloro-10H-phenothiazine, belongs to thiazines compound, is a common compound. 1910-85-6In an article, authors is Alahmari, Fatemah, once mentioned the new application about 1910-85-6.

Photodynamic therapy in the treatment of periodontal diseases: A literature review

Aim: Periodontal diseases remain a challenging clinical condition and hence existing literature showed no consensus on the best treatment option for disease control. The aim of this review was to provide a comprehensive overview of exciting clinical evidence on the effect of photodynamic therapy (PDT) in the treatment of periodontal diseases. Materials and Method: A literature review was performed using MEDLINE, PubMed, Wiley, ScienceDirect, and Scopus using the terms PDT, periodontal disease, laser, scaling and root planning, chronic periodontitis, and aggressive periodontitis. Results: Of a total of 149 articles appeared from various sources, 147 articles were screened and 36 were related to the research objective. Adjunctive therapy with PDT may promote additional clinical and microbiological outcomes. Conclusion: Little information is available with regard to PDT photosensitizers, wavelength, number of sessions, and duration. Therefore, large randomized control trials with longer follow-up are needed to assess the potential of PDT in the treatment of periodontal disease.

Do you like my blog? If you like, you can also browse other articles about this kind. Thanks for taking the time to read the blog about 1910-85-6

Reference£º
Thiazine – an overview | ScienceDirect Topics,
Thiazine | C4H5NS – PubChem

 

In homogeneous catalysis, the catalyst is in the same phase as the reactant. The number of collisions between reactants and catalyst is at a maximum.In a patent, 3939-23-9, name is 3-Bromo-10H-phenothiazine, introducing its new discovery. 3939-23-9

Spin-orbit charge transfer intersystem crossing in perylenemonoimide-phenothiazine compact electron donor-acceptor dyads

The spin-orbit charge transfer intersystem crossing (SOCT-ISC) of perylenemonoimide-phenothiazine compact dyads was shown to depend on the molecular geometry and the vector dipole orientations of the two chromophores, and the dyads show high triplet state quantum yields (57%).

The proportionality constant is the rate constant for the particular unimolecular reaction. the reaction rate is directly proportional to the concentration of the reactant. I hope my blog about 3939-23-9 is helpful to your research. 3939-23-9

Reference£º
Thiazine – an overview | ScienceDirect Topics,
Thiazine | C4H5NS – PubChem

 

3939-23-9, The reaction rate of a catalyzed reaction is faster than the reaction rate of the uncatalyzed reaction at the same temperature.3939-23-9, Name is 3-Bromo-10H-phenothiazine, molecular formula is C12H8BrNS. In a Article, authors is Sailer, Markus£¬once mentioned of 3939-23-9

Synthesis and electronic properties of monodisperse oligophenothiazines

Starting from N-hexylphenothiazine, a versatile construction kit of brominated and borylated phenothiazines can be easily prepared by a sequence of bromination, bromo-lithium exchange/borylation, and Suzuki coupling. Subsequent Suzuki arylation of the building blocks gives soluble, monodisperse, and structurally well defined oligophenothiazines in good yields. The molecular weights at the peak maximum (Mp), obtained by GPC (gel permeation chromatography), and the actual molecular weights of the oligomer series, obtained by mass spectrometry, show excellent correlation. A QM/MM conformational analysis for the complete series reveals that the obvious butterfly-shaped phenothiazine structure multiplies and significantly reduces the hydrodynamic volume of the oligomers. The electronic properties (absorption and emission spectroscopy and cyclic voltammetry) give reasonable correlations with the chain length. With regard to the emission maxima, the effective conjugation length is already reached with the hexamer. Oligophenothiazines are highly fluorescent, with high fluorescence quantum yields, and are simultaneously highly electroactive, with low oxidation potentials.

A reaction mechanism is the microscopic path by which reactants are transformed into products. Each step is an elementary reaction. In my other articles, you can also check out more blogs about 3939-23-9

Reference£º
Thiazine – an overview | ScienceDirect Topics,
Thiazine | C4H5NS – PubChem

 

1910-85-6, The reaction rate of a catalyzed reaction is faster than the reaction rate of the uncatalyzed reaction at the same temperature.1910-85-6, Name is 1-Chloro-10H-phenothiazine, molecular formula is C12H8ClNS. In a Review, authors is Sivaramakrishnan, Gowri£¬once mentioned of 1910-85-6

Photodynamic therapy for the treatment of peri-implant diseases: A network meta-analysis of randomized controlled trials

Background Photodynamic therapy in peri-implantitis has been tested in randomized clinical trials. Though systematic review and meta-analysis on human and animal studies, identifies the utility of photodynamic therapy, a comparison of other interventions with photodynamic therapy for peri-implantitis does not exist. Hence the aim of this network meta-analysis is to identify the role of photodynamic therapy for peri-implantitis compared with other interventions tested in randomized human clinical trials. Method Randomized controlled trials comparing photodynamic therapy and other interventions in patients with peri- implantitis was searched for in electronic databases. The risk of bias was calculated using Cochrane risk of Bias tool. The heterogeneity between the studies in direct comparison was assessed using Chi-square and I2 tests. GRADE working group approach was used to assess the quality of evidence. Publication bias was assessed using Funnel plot and Trim and Fill method was used to identify the number of missing studies. Results We observed a significant reduction in the level of attachment scores with the use of combined photodynamic therapy with mechanical debridement when compared with other interventions tested. For bleeding on probing, pocket depth and plaque scores no statistically significant results were obtained. Conclusion The use of photodynamic therapy with mechanical debridement will definitely bring about significant improvement in patients with peri-implantitis. Further trials on the use of photodynamic therapy with other treatment modalities need to be tested to arrive at the best possible treatment option for peri-implantitis.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law.1910-85-6. In my other articles, you can also check out more blogs about 1910-85-6

Reference£º
Thiazine – an overview | ScienceDirect Topics,
Thiazine | C4H5NS – PubChem

 

38642-74-9. We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. 38642-74-9, name is :2-Cyano-phenothiazine, below Introduce a new synthetic route.

2-cyanophenothiazine (0.74 g, 3.30 mmol) was dissolved in 10 mL of anhydrous DMF. The mixture was cooled to 0 C and 60 % NaH (0.40 g, 9.90 mmol) was added. The dark mixture was stirred at 0 C for an additional 15 mm and Di-tert-butyl dicarbonate (0.90 g, 3.96 mmol) was added. The mixture was stirred at room temperature for 3 h and was diluted with 50 mL of brine. The aqueous layer was extracted with three 25 mL portions of ethyl acetate. The combined organic extract was dried over anhydrous MgSO4 and concentrated under diminished pressure. The crude was purified on a silica gel column (10 cm x 2 cm). Elution with ethyl acetate-hexane (1:9) gave 1 as a pale yellow solid: yield 1.07 g (100%); silica gel TLC R10.26 (ethyl acetate-hexane 1:9); ?HNIVIR (CDC13) 51.49 (s, 9H), 7.16-7.20 (m, 1H), 7.28-7.33 (m, 2H), 7.40 (s, 2H), 7.49 (d, 1H, J= 8.4 Hz) and 7.80 (s, 1H); ?3CI?IvIR 28.1, 83.1, 110.2, 118.2, 126.6, 127.2, 127.3, 127.5, 128.1,129.1, 130.3, 130.6, 137.7, 139.0, 139.1 and 151.8; mass spectrum (APCI), m/z 325.1017 (M+H) (C18H17N202S requires m/z 325.1011)., 38642-74-9

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 38642-74-9, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; ARIZONA BOARD OF REGENTS ON BEHALF OF ARIZONA STATE UNIVERSITY; HECHT, Sidney; KHDOUR, Omar; CHOWDHURY, Sandipan, Roy; BANDYOPADHAY, Indrajit; (85 pag.)WO2016/133995; (2016); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism., 272437-84-0, If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.272437-84-0, name is :3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid. A new synthetic method of this compound is introduced below.

Preparation of (3-oxo-3,4-dihvdro-2H-benzori,41thiazine-6-carboxylic acid {trans-4-2-(6- methoxy-ri,51naphthyridin-3-yloxy)-ethyll-cvclohexyU)-amide: 3-Oxo-3,4-dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid (59 mg, 0.25 mmol, 1.0 eq) is added at room temperature to a stirred solution of tralphar¡ã-4-[2-(6-methoxy- [l,5]naphthyridin-3-yloxy)-ethyl]-cyclohexylamine (80 mg, 0.25 mmol, 1.0 eq) inN,N- dimethylformamide (5 mL), followed by 1-hydroxybenzotriazole (37 mg, 0.28 mmol, 1.1 eq), N-(3-dimethylaminopropyl)-N’-ethylcarbodiimide hydrochloride (56 mg, 0.29 mmol, 1.15 eq) and 7V,N-diisopropylethylamine (97 muL, 0.57 mmol, 2.25 eq). After 15 hours stirring at room temperature, solvent is evaporated and the residue is extracted with dichloromethane (3 x 10 mL) and water (10 mL). The combined organic layers are dried over sodium sulfate, filtered and concentrated to give a crude product that is purified by preparative EtaPLC to afford (3-oxo-3,4-dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid {trans-4-[2-(6- methoxy-[l,5]naphthyridin-3-yloxy)-ethyl]-cyclohexyl})-amide as a white lyophilizated powder (36 mg, 27% yield). 1H-NMR (400 MHz, DMSO-t/6) delta ppm: 10.64 (s, IH), 8.53 (d, J = 2.8 Hz, IH), 8.19 (dd, J = 0.7, 9.0 Hz, 2H), 7.62 (dd, J = 0.5, 2.5 Hz, IH), 7.37-7.46 (m, 3H), 7.07 (d, J = 9.0 Hz, IH), 4.24 (t, J = 6.6 Hz, 2H), 4.00 (s, 3H), 3.70-3.80 (m, IH), 3.50 (s, 2H), 1.80-1.90 (m, 4H), 1.70-1.80 (m, 2H), 1.45-1.55 (m, IH), 1.30-1.40 (m, 2H), 1.05-1.18 (m, 2H). MS m/z (+ESI): 493.4 [M+H]+., 272437-84-0

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid,272437-84-0,its application will become more common.

Reference£º
Patent; BASILEA PHARMACEUTICA AG; GAUCHER, Berangere; DANEL, Franck Hubert; ROUSSEL, Patrick; WO2010/84152; (2010); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

188614-01-9. We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. 188614-01-9, name is :Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate, below Introduce a new synthetic route.

A. 3-Oxo-3,4-dihydro-2H-benzo[1,4]thiazine-6-carboxylic acid. To a solution of 3-oxo-3,4-dihydro-2H-benzo[1,4]thiazine-6-carboxylic acid methyl ester (1.5 g, 6,7 mmol) in a THF/H2O mixture (1:1, 63 mL) was added 4 N LiOH (8.0 mL, 32 mmol) and the resulting solution was stirred at RT for 24 h. The solution was partially concentrated and diluted with H2O (50 mL). The solution was acidified using concentrated HCl and a solid precipitated. The solid was collected via filtration, washed with H2O and dried in vacuo to provide 0.79 g (60%) of the title compound as a white solid. MS (ESI): exact mass calculated for C9H7NO3S, 209.01; m/z found, 210.2 [M+H]+. 1H NMR (500 MHz, CD3OD): 7.65-7.61 (m, 2H), 7.40 (d, J=8.1, 1H), 3.48 (s, 2H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 188614-01-9, and friends who are interested can also refer to it.

Reference£º
Patent; Allison, Brett D.; Gomez, Laurent; Grice, Cheryl A.; Hack, Michael D.; Morrow, Brian J.; Motley, S. Timothy; Santillan, Alejandro; Shaw, Karen J.; Schwarz, Kimberly L.; Tang, Liu Y.; Venkatesan, Hariharan; Wiener, John J. M.; US2006/223810; (2006); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 272437-84-0, name is :3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid, introduce a new downstream synthesis route as follows. 272437-84-0

3-Oxo-3,4-dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid (31 mg, 0.14 mmol, 1.0 eq) is added at room temperature to a stirred solution of l-(6-methoxy-3,4-dihydro-2H-l-oxa-9-aza- phenanthrene-3-yl)-piperidin-4-ylamine (50 mg, 0.14 mmol, 1.0 eq) in N,N- dimethylformamide (3 mL), followed by 1-hydroxybenzotriazole (21 mg, 0.15 mmol, 1.1 eq), N-(3-dimethylaminopropyl)-N’-ethylcarbodiimide hydrochloride (31 mg, 0.16 mmol, 1.15 eq) and NN-diisopropylethylamine (53 mu, 0.31 mmol, 2.25 eq). After 15 hours stirring at room temperature, solvent is evaporated and the residue is extracted with dichloromethane (3 x 10 mL) and water (10 mL). The combined organic layers are dried over sodium sulfate, filtered and concentrated to give a crude product that is purified by preparative HPLC to afford 3-oxo-3,4- dihydro-2H-benzo[ 1 ,4]thiazine-6-carboxylic acid [ 1 -(6-methoxy-3 ,4-dihydro-2H- 1 -oxa-9- aza-phenanthrene-3-yl)-piperidin-4-yl] -amide as an off-white lyophilizated powder (24 mg, 33% yield). 1H-NMR (400 MHz, DMSO-dtf) delta ppm: 10.66 (br, 1H), 8.33 (s, 1H), 8.24 (d, J = 7.6 Hz, 1H), 7.81 (d, J = 9.0 Hz, 1H), 7.42 (m, 2H), 7.38 (m, 1H), 7.20 (m, 2H), 4.47 (d, J = 11.0 Hz, 1H), 4.02 (m, 1H), 3.93 (s, 3H), 3.78 (m, 1H), 3.50 (s, 2H), 3.20 (m, 1H), 3.08 (m, 2H), 3.00 (m, 2H), 2.42 (m, 2H), 1.81 (m, 2H), 1.58 (m, 2H).MS m/z (+ESI): 505.2 [M+H]+.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 272437-84-0.

Reference£º
Patent; BASILEA PHARMACEUTICA AG; GAUCHER, Berangere; DANEL, Franck, Hubert; TANG, XiaoHu; XIE, Tong; XU, Lin; WO2011/73378; (2011); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

188614-01-9. We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. 188614-01-9, name is :Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate, below Introduce a new synthetic route.

188614-01-9, 3-Oxo-3, 4-dihydro-2H-benzo [1, 4] thiazine-6-carboxylic acid methyl ester (6.74 g) was suspended in tetrahydrofuran (100 ml) and 2M sodium hydroxide [(30] ml) was added followed by water (20 ml). The solution was stirred for 2.5 hours, evaporated to half volume and acidified with 2M hydrochloric acid. The product was collected, washed with water and dried in vacuo, to give a white solid (6.2 g). MS (-ve ion electrospray) [L} L/Z] 208 (M-H)-

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 188614-01-9, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; GLAXO GROUP LIMITED; WO2004/2992; (2004); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

188614-01-9, The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.188614-01-9, name is :Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate. A new synthetic method of this compound is introduced below.

At 40 in to methyl-3-oxo-3,4-dihydro -2H-1,4- benzothiazine-6-carboxylate (475mg, 2.00mmol), borohydride the mixture of sodium (151mg, 3.99mmol) in tetrahydrofuran (2.0mL) dropwise addition of methanol (640mg). After stirring for 1 hour at 40 , under ice-cooling, use 1mol / L diluted hydrochloric acid, and extracted with ethyl acetate. The combined organic layers were dried over sodium sulfate, filtered, concentrated, and the use of silica gel column chromatography (hexane: ethyl acetate = 1: 1) and the residue was purified to obtain the title compound (130mg, 31%) .

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate reaction routes.

Reference£º
Patent; SUMITOMO DAINIPPON PHARMA CO., LTD.; YOSHINAGA, HIDEFUMI; URUNO, YOSHIHARU; SAWAMURA, KIYOTO; GOTO, NANA; IKUMA, YOHEI; (165 pag.)TW2016/5858; (2016); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem