Category: 3939-23-9

3939-23-9, The reaction rate of a catalyzed reaction is faster than the reaction rate of the uncatalyzed reaction at the same temperature.3939-23-9, Name is 3-Bromo-10H-phenothiazine, molecular formula is C12H8BrNS. In a Article, authors is Sailer, Markus£¬once mentioned of 3939-23-9

Synthesis and electronic properties of monodisperse oligophenothiazines

Starting from N-hexylphenothiazine, a versatile construction kit of brominated and borylated phenothiazines can be easily prepared by a sequence of bromination, bromo-lithium exchange/borylation, and Suzuki coupling. Subsequent Suzuki arylation of the building blocks gives soluble, monodisperse, and structurally well defined oligophenothiazines in good yields. The molecular weights at the peak maximum (Mp), obtained by GPC (gel permeation chromatography), and the actual molecular weights of the oligomer series, obtained by mass spectrometry, show excellent correlation. A QM/MM conformational analysis for the complete series reveals that the obvious butterfly-shaped phenothiazine structure multiplies and significantly reduces the hydrodynamic volume of the oligomers. The electronic properties (absorption and emission spectroscopy and cyclic voltammetry) give reasonable correlations with the chain length. With regard to the emission maxima, the effective conjugation length is already reached with the hexamer. Oligophenothiazines are highly fluorescent, with high fluorescence quantum yields, and are simultaneously highly electroactive, with low oxidation potentials.

A reaction mechanism is the microscopic path by which reactants are transformed into products. Each step is an elementary reaction. In my other articles, you can also check out more blogs about 3939-23-9

Reference£º
Thiazine – an overview | ScienceDirect Topics,
Thiazine | C4H5NS – PubChem

 

3939-23-9. We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. 3939-23-9, name is :3-Bromo-10H-phenothiazine, below Introduce a new synthetic route.

In a 250 ml three-necked flask, 0.01 mol of raw material A1, 0.012 mol of raw material B1, 150 ml of toluene were added under a nitrogen atmosphere, and the mixture was stirred and mixed.Then, 0.03 mol of sodium t-butoxide, 5 ¡Á 10 -5 mol of Pd 2 (dba) 3, 5 ¡Á 10 -5 mol of tri-tert-butylphosphine was added, and the mixture was heated to 105 C, and refluxed for 24 hours.The sampling point plate shows that no raw material A1 remains, the reaction is complete; it is naturally cooled to room temperature, filtered, and the filtrate is steamed to a non-fraction (-0.09 MPa, 85 C) under reduced pressure, and passed through a neutral silica gel column to obtain an intermediate B1.HPLC purity 99.2%, yield 75.2%;

The chemical industry reduces the impact on the environment during synthesis, 3939-23-9,3-Bromo-10H-phenothiazine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Jiangsu March Optoelectric Technology Co., Ltd.; Tang Dandan; Zhang Zhaochao; Li Chong; Zhang Xiaoqing; (44 pag.)CN108218853; (2018); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

An elementary termolecular reaction involves the simultaneous collision of three atoms, 3939-23-9, molecules, or ions. Here is a downstream synthesis route of the compound 3939-23-9, name is :3-Bromo-10H-phenothiazine

2, under the protection of nitrogen will be prepared in step 1 aromatic diamine and phenothiazine derivatives according to 1:1 molar ratio was added to toluene, while adding potassium tert-butyl alcohol and palladium acetate as a catalyst,The reaction was heated to 80 C for 3 hours and then cooled to room temperature. The reaction was filtered,The filtrate was washed with dichloromethane and then the solvent was evaporated to dryness. The crude product was repeatedly washed with methanol and acetone,The product is obtained after purification by column chromatography.

According to the analysis of related databases, 3-Bromo-10H-phenothiazine, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; Changchun Hai Purunsi Technology Co., Ltd.; Guo Jianhua; (12 pag.)CN106831645; (2017); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

3939-23-9, A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.3939-23-9, name is :3-Bromo-10H-phenothiazine. An updated downstream synthesis route of 3939-23-9 as follows.

2, under nitrogen protection will be prepared in step 1 p-phenylenediamine and phenothiazine derivatives according to 1:1 molar ratio was added to toluene, while adding potassium tert-butyl alcohol and palladium acetate as a catalyst,The reaction was heated to 80 C for 3 hours and then cooled to room temperature. The reaction was filtered,The filtrate was washed with dichloromethane and then the solvent was evaporated to dryness. The crude product was repeatedly washed with methanol and acetone,The product is obtained after purification by column chromatography., 3939-23-9

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 3-Bromo-10H-phenothiazine.

Reference£º
Patent; Changchun Hai Purunsi Technology Co., Ltd.; Guo Jianhua; (12 pag.)CN106831645; (2017); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

3939-23-9. The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a downstream synthesis route of the compound 3939-23-9, name is :3-Bromo-10H-phenothiazine

To a stirred solution of 3-bromo-1OH-phenothiazine(1 8 g, 64.72 mmol) in DIVIF (100 mL) was added sodium hydride (3.8 g, 97.08 mmol) at 0 C in small portions and the reaction mixture was stirred at 0 C for 15 mins. To the reaction mixture was added 3-bromo chloropropane (12.2 g,77.66 mmol) at 0 C and stirring continued at room temperature for 1 h. The reaction wasquenched with aq.NH4C1 solution, extracted with EtOAc, organic layer is washed with brine, dried over anhydrous sodiumsulphate, and concentrated. The crude product (20 g) was as such taken for the next step without further purification: MS (ESI) m/z3 55 (M+2H)., 3939-23-9

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 3939-23-9, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; BIOIMICS AB; KIRSEBOM, Leif; UPADHAYAYA, Ram Shankar; KETHIRI, Raghava Reddy; VIRTANEN, Anders; (308 pag.)WO2017/222466; (2017); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, 3939-23-9, greener environment, people will have to find innovative ways to maintain their relevance. Here is a downstream synthesis route of the compound 3939-23-9, name is :3-Bromo-10H-phenothiazine

In a nitrogen-flushed 250 mL round-bottom flask with a magnetic stir bar and septum 3-bromo-10H-phenothiazine (4.95 g, 17.8 mmol) was dissolved in dry THF (50 mL) under nitrogen. The colorless solution was deaerated by a constant stream of nitrogen through a syringe for 10 min and cooled to 0 C (ice bath/water). Potassium tert-butanolate (2.40 g, 21.4 mmol) was added to the reaction mixture under nitrogen and the reaction mixture was allowed to come to room temperature and then stirred for 1 h. To this solution 1-bromo hexane (3.00 mL, 21.4 mmol) was slowly added by syringe and stirring at room temp was continued for 16 h. The solvents were removed in vacuo and the residue was adsorbed onto celiteand purified by chromatography on silica gel (n-hexane) to give 5.83 g (90%) of 3-bromo-10-hexyl-10H-phenothiazine (1a) as a yellow resin, Rf (n-hexane) = 0.43. The NMR spectra were in excellent agreement with the literature. 1H NMR (300 MHz, acetone-d6): delta = 0.84 (t, 3J = 7.1 Hz, 3 H), 1.23-1.33 (m, 4 H), 1.44 (dt, 3J = 7.2 Hz, 3J = 6.8 Hz, 2 H), 1.77 (dt, 3J = 7.5 Hz, 3J = 7.5 Hz, 2 H), 3.92 (t, 3J = 7.0 Hz, 2 H), 6.95 (d, 3J = 8.7 Hz, 2 H), 7.03 (dd, 3J = 8.2 Hz, 4J = 0.9 Hz, 1 H), 7.14 (dd, 3J = 7.6 Hz, 4J = 1.4 Hz, 1 H), 7.21 (ddd, 3J = 8.2 Hz, 3J = 7.3 Hz, 4J = 1.6 Hz, 1 H), 7.27 (d, 4J = 2.2 Hz, 1 H), 7.32 (dd, 3J = 8.6 Hz, 4J = 2.3 Hz, 1 H). -13C NMR (75 MHz, acetone-d6): delta = 14.2 (CH3), 23.2 (CH2), 27.0 (CH2), 27.4 (CH2), 32.1 (CH2), 47.9 (CH2), 114.7 (Cquat), 116.9 (CH), 118.1 (CH), 123.6 (CH), 124.7 (Cquat), 128.1 (Cquat), 128.1 (CH), 128.6 (CH), 130.0 (CH), 130.9 (CH), 145.7 (Cquat), 145.9 (Cquat).

The chemical industry reduces the impact on the environment during synthesis, 3939-23-9,3-Bromo-10H-phenothiazine,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Urselmann, Dominik; Deilhof, Konstantin; Mayer, Bernhard; Mueller, Thomas J. J.; Beilstein Journal of Organic Chemistry; vol. 12; (2016); p. 2055 – 2064;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. 3939-23-9, name is :3-Bromo-10H-phenothiazine, below Introduce a new synthetic route.. 3939-23-9

Step 2, 132 mmol of 9-BBN was dissolved in THF at 0 C, 44 mmol of 1-2, Stirring for 15min, warming to 35 degrees Celsius, reaction 3h, and then transferred to the mixture containing 5-1 66mmoltetrakis(triphenylphosphine)palladium 0.88 mmol, sodium carbonate 132 mmol in toluene: ethanol: water = 4: 1: 1, and the temperature was raised to reflux temperature reaction24h. The crude product was passed through a silica gel column to give the product 20 mmol, 5-2.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 3939-23-9, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; Changchun Hai Purunsi Technology Co., Ltd.; Sun Keyi; Cai Hui; (31 pag.)CN106946934; (2017); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.3939-23-9, name is :3-Bromo-10H-phenothiazine. An updated downstream synthesis route of 3939-23-9 as follows.3939-23-9

To a stirred solution of 3-bromo-1OH-phenothiazine(1 8 g, 64.72 mmol) in DIVIF (100 mL) was added sodium hydride (3.8 g, 97.08 mmol) at 0 C in small portions and the reaction mixture was stirred at 0 C for 15 mins. To the reaction mixture was added 3-bromo chloropropane (12.2 g,77.66 mmol) at 0 C and stirring continued at room temperature for 1 h. The reaction wasquenched with aq.NH4C1 solution, extracted with EtOAc, organic layer is washed with brine, dried over anhydrous sodiumsulphate, and concentrated. The crude product (20 g) was as such taken for the next step without further purification: MS (ESI) m/z3 55 (M+2H).

According to the analysis of related databases, 3939-23-9, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; BIOIMICS AB; KIRSEBOM, Leif; UPADHAYAYA, Ram Shankar; KETHIRI, Raghava Reddy; VIRTANEN, Anders; (308 pag.)WO2017/222466; (2017); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism., 3939-23-9, If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.3939-23-9, name is :3-Bromo-10H-phenothiazine. A new synthetic method of this compound is introduced below.

In a 250 ml three-necked flask, 0.01 mol of raw material A1, 0.012 mol of raw material B1, 150 ml of toluene were added under a nitrogen atmosphere, and the mixture was stirred and mixed.Then, 0.03 mol of sodium t-butoxide, 5 ¡Á 10 -5 mol of Pd 2 (dba) 3, 5 ¡Á 10 -5 mol of tri-tert-butylphosphine was added, and the mixture was heated to 105 C, and refluxed for 24 hours.The sampling point plate shows that no raw material A1 remains, the reaction is complete; it is naturally cooled to room temperature, filtered, and the filtrate is steamed to a non-fraction (-0.09 MPa, 85 C) under reduced pressure, and passed through a neutral silica gel column to obtain an intermediate B1.HPLC purity 99.2%, yield 75.2%;

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 3939-23-9.

Reference£º
Patent; Jiangsu March Optoelectric Technology Co., Ltd.; Tang Dandan; Zhang Zhaochao; Li Chong; Zhang Xiaoqing; (44 pag.)CN108218853; (2018); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

 

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.3939-23-9,3-Bromo-10H-phenothiazine, it is a common compound, a new synthetic route is introduced below.3939-23-9

Tri-tert-butylphosphine (4.4 mL of a 1.0 M solution in toluene, 1.48 g, 0.05 mmol), palladium acetate (0.4 g,1.83 mmol) and sodium tert-butoxide (52.7 g, 549 mmol) were added to 2-6-a (20.423 g, 73.42 mmol) and 2-6-c(11.53 g, 73.42 mmol) a solution in degassed toluene (500 mL), and the mixture was warmed under reflux for 2 hr.The reaction mixture was cooled to room temperature, diluted with toluene and filtered over EtOAc. Dilute the filtrate with water and use aThe benzene was extracted and the organic phases were combined and evaporated under vacuum. The residue was passed through silica gel (heptane / dichloromethane)Filtration was carried out and crystallized from isopropanol. Obtaining 2-6-b 19.51 g, yield 75%; the resulting bromide 2-6-b(7.89 g, 20 mmol), pinacol borate (6.22 g, 24 mmol), 1,1′-bis(diphenylphosphino)-ferrocene-palladium dichloride(II) dichloromethane complex (0.49 g, 0.6 mmol), potassium acetate (5.90 g, 60 mmol) and 79 ml of toluene were reacted under refluxAfter 16 hours, cool, add 26 ml of water and stir for 30 minutes.The organic phase is separated and filtered through a short bed of diatomaceous earth, followed by organicThe solvent was distilled off and the crude product was recrystallized from heptane / toluene.The compound 2-6 was obtained in an amount of 6.58 g, yield 82%.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 3939-23-9, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; Changchun Hai Purunsi Technology Co., Ltd.; Zhang Hong; Cai Hui; (36 pag.)CN108530418; (2018); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem