Tag: M.W:200-300

A common heterocyclic compound, 3939-23-9,3-Bromo-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 3939-23-9

In a 250 ml three-necked flask, 0.01 mol of raw material A1, 0.012 mol of raw material B1, 150 ml of toluene were added under a nitrogen atmosphere, and the mixture was stirred and mixed.Then, 0.03 mol of sodium t-butoxide, 5 ¡Á 10 -5 mol of Pd 2 (dba) 3, 5 ¡Á 10 -5 mol of tri-tert-butylphosphine was added, and the mixture was heated to 105 C, and refluxed for 24 hours.The sampling point plate shows that no raw material A1 remains, the reaction is complete; it is naturally cooled to room temperature, filtered, and the filtrate is steamed to a non-fraction (-0.09 MPa, 85 C) under reduced pressure, and passed through a neutral silica gel column to obtain an intermediate B1.HPLC purity 99.2%, yield 75.2%;

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,3939-23-9,3-Bromo-10H-phenothiazine,its application will become more common.

Reference£º
Patent; Jiangsu March Optoelectric Technology Co., Ltd.; Tang Dandan; Zhang Zhaochao; Li Chong; Zhang Xiaoqing; (44 pag.)CN108218853; (2018); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 272437-84-0,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 272437-84-0

Preparation of 3-oxo-3,4-dihvdro-2H-benzori,41thiazine-6-carboxylic acid (l-[2-(6- methoxy-quinolin-3-ylsulfanyl)-ethyll-piperidin-4-vU -amide: 3-oxo-3,4-dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid (21 mg, 0.09 mmol, 1.0 eq) is added at room temperature to a stirred solution of l-[2-(6-methoxy-quinolin-3-ylsulfanyl)- ethyl]-piperidin-4-ylamine (30 mg, 0.09 mmol, 1.0 eq) in N,N-dimethylformamide (3 mL), followed by 1-hydroxybenzotriazole (13 mg, 0.10 mmol, 1.1 eq), N-Q- dimethylaminopropyl)-N’-ethylcarbodiimide hydrochloride (20 mg, 0.10 mmol, 1.15 eq) and N,N-diisopropylethylamine (35 muL, 0.20 mmol, 2.25 eq). After 15 hours stirring at room temperature, solvent is evaporated and the residue is extracted with dichloromethane (3 x 5 mL) and water (5 mL). The combined organic layers are dried over sodium sulfate, filtered and concentrated to give a residue that is purified by preparative EtaPLC to afford 3-oxo-3,4- dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid {l-[2-(6-methoxy-quinolin-3- ylsulfanyl)-ethyl]-piperidin-4-yl} -amide as a white solid (30 mg, 59% yield).1H-NMR (400 MHz, DMSO-t/6) delta ppm: 11.65 (s, IH), 8.65 (d, J = 2.5 Hz, IH), 8.20-8.25 (m, 2H), 7.88 (d, J = 8.8 Hz, IH), 7.30-7.45 (m, 5H), 3.93 (s, 3H), 3.75 (m, IH), 3.50 (s, 2H), 3.29 (t, J = 7.0 Hz, 2H), 2.95 (m, 2H), 2.66 (t, J = 7.0 Hz, 2H), 2.11 (m, 2H), 1.78 (m, 2H), 1.58 (m, 2H). MS m/z (+ESI): 509.3 [M+H]+., 272437-84-0

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid,272437-84-0,its application will become more common.

Reference£º
Patent; BASILEA PHARMACEUTICA AG; GAUCHER, Berangere; DANEL, Franck Hubert; ROUSSEL, Patrick; WO2010/84152; (2010); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 188614-01-9,Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 188614-01-9

Step 1. Borane-tetrahydrofuran complex solution (1 M in tetrahydrofuran, 45 mL, 45 mmol) was added at 0 C. to a suspension of methyl-3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate (2.00 g, 8.96 mmol) in tetrahydrofuran (20 mL). The ice bath was removed, the homogenous solution stirred at room temperature for 2 h, then excess reagent was destroyed by careful addition of methanol (42 mL) at 0 C. After evaporation of volatile material, the residue was taken up in 5% methanolic sulfuric acid solution (25 mL) and the solution was heated at reflux over 80 min. After cooling, the reaction mixture was partitioned between ethyl acetate and water, the organic layer was dried (MgSO4) and evaporated to produce 3,4-dihydro-2H-benzo[1,4]thiazine-6-carboxylic acid methyl ester (1.79 g, 96%). Light yellow solid, MS (ISP)=210.1 (M+H)+., 188614-01-9

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,188614-01-9,Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate,its application will become more common.

Reference£º
Patent; Ackermann, Jean; Bleicher, Konrad; Ceccarelli, Simona M.; Chomienne, Odile; Mattei, Patrizio; Sander, Ulrike Obst; US2007/191603; (2007); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 92-39-7,2-Chloro-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 92-39-7

Step: Step 1, the reaction system azeotropic water removal: To the reaction kettle with argon gas was added 50 kg of N-methylpyrrolidone at room temperature, 2-chlorophenothiazine 50 kg, cuprous cyanide 23 kg, lithium iodide 0.23 kg, potassium iodide 3.55 kg and cyclohexane 25 kg, Stirring up to 85C , boiling a total of boiling water, about 40min, measured water 0.04wt.% (Moisture ? 0.05wt.%). Step 2: Preparation of 2-cyanophenothiazine by refluxing reaction: The reaction system after the removal of water continued to warm to 112 C, Atmospheric distillation distillation system in the cyclohexane, cyclohexane can be recycled recycling, Continue to heat up to the reflux state (T = 218 ), insulation reaction 10h, To obtain a reaction product; Step 3, the reaction product after treatment and extraction: After the reaction, the temperature was lowered to 75 C, To the reaction system was added sodium thiosulfate solution (sodium thiosulfate 33 kg and water 250 kg mixed dissolved) Stirring for 2h, cooling to 5 , filtering, the first filter cake and the first filtrate, The first filter cake was dried at 90 C to a moisture content of ? 4 wt.%. The first filter cake was extracted with acetone, The dried cake and acetone 700L, heated to reflux 30min, down to 50 , The second filter cake and the second filtrate were filtered and the second filtrate was concentrated at atmospheric pressure to give 500 L of acetone to give a concentrate, The concentrated liquid for low temperature precipitation, the specific process is to concentrate the solution to 0 , filtration, Dried 2-cyanophenothiazine crude 45kg, 98% purity, amide impurity 0.9%.Step 4: Purification of crude 2-cyanophenothiazine: 2-cyanophenothiazine crude 45kg and acetone 36kg heated to reflux, reflux insulation 30min. Cooled to 0 C, filtered and dried to give 4-cyano phenothiazine 43.2 kg, purity ?99% Amide impurities ? 0.1%, yield: 90.0%This example gives an industrial preparation method of an environment-friendly 2-cyanophenothiazine, The method of other processes and implementation Example 1 is the same, the difference is only: In the third step, the mass of the dried first filter cake and the ratio of the second organic solvent acetone used in the first filter cake Was adjusted to 1:15 from 1: 8 of Example 1. The yield of 2-cyanophenothiazine was 90.2% based on 2-chlorophenothiazine

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,2-Chloro-10H-phenothiazine,92-39-7,its application will become more common.

Reference£º
Patent; Xi’an Caijing Optoelectric Technology Co., Ltd.; Gao Aiai; Zhao Qunxing; Zhou Bugao; Fan Jia; Bie Guojun; Yan Xiaoliang; Lan Aihu; Guo Chuang; Li Jian; Xu Lei; Zhang Weijie; Wang Li; (11 pag.)CN106946811; (2017); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 3939-23-9,3-Bromo-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 3939-23-9

Tri-tert-butylphosphine (4.4 mL of a 1.0 M solution in toluene, 1.48 g, 0.05 mmol), palladium acetate (0.4 g,1.83 mmol) and sodium tert-butoxide (52.7 g, 549 mmol) were added to 2-6-a (20.423 g, 73.42 mmol) and 2-6-c(11.53 g, 73.42 mmol) a solution in degassed toluene (500 mL), and the mixture was warmed under reflux for 2 hr.The reaction mixture was cooled to room temperature, diluted with toluene and filtered over EtOAc. Dilute the filtrate with water and use aThe benzene was extracted and the organic phases were combined and evaporated under vacuum. The residue was passed through silica gel (heptane / dichloromethane)Filtration was carried out and crystallized from isopropanol. Obtaining 2-6-b 19.51 g, yield 75%; the resulting bromide 2-6-b(7.89 g, 20 mmol), pinacol borate (6.22 g, 24 mmol), 1,1′-bis(diphenylphosphino)-ferrocene-palladium dichloride(II) dichloromethane complex (0.49 g, 0.6 mmol), potassium acetate (5.90 g, 60 mmol) and 79 ml of toluene were reacted under refluxAfter 16 hours, cool, add 26 ml of water and stir for 30 minutes.The organic phase is separated and filtered through a short bed of diatomaceous earth, followed by organicThe solvent was distilled off and the crude product was recrystallized from heptane / toluene.The compound 2-6 was obtained in an amount of 6.58 g, yield 82%.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,3939-23-9,3-Bromo-10H-phenothiazine,its application will become more common.

Reference£º
Patent; Changchun Hai Purunsi Technology Co., Ltd.; Zhang Hong; Cai Hui; (36 pag.)CN108530418; (2018); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

1771-18-2 A common heterocyclic compound, 1771-18-2,2-Methoxyphenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

38.1) 2-Methoxy-10H-phenothiazine-1-carbaldehyde: 4.6 g (20 mmol) of 2-methoxy-10H-phenothiazine are dissolved, under an argon atmosphere, in a three-necked flask, containing 140 ml anhydrous ethyl ether. 20 ml (50 mmol) of a solution of nBuLi (2.5 M) in hexane is then added dropwise, at 20 C. The reaction mixture is agitated for 3 hours at 20 C. before the dropwise addition of 6.2 ml (80 mmol) of anhydrous DMF. Agitation is maintained for another 15 hours at 20 C. The whole is then poured into 150 ml ice-cooled water and the product is extracted twice using 200 ml of ethyl acetate. The organic solution is washed with 100 ml of salt water, dried over MgSO4, filtered and concentrated under vacuum. The evaporation residue is taken up in diisopropyl ether, filtered and dried to produce a red solid with a yield of 30%. Melting point: 155-160 C.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1771-18-2,2-Methoxyphenothiazine,its application will become more common.

Reference£º
Patent; Societe de Conseils de Recherches et d’Applications Scientifiques (S.C.R.A.S.); US6482822; (2002); B1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 272437-84-0,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 272437-84-0

Preparation of (3-oxo-3,4-dihvdro-2H-benzori,41thiazine-6-carboxylic acid {trans-4-2-(6- methoxy-ri,51naphthyridin-3-yloxy)-ethyll-cvclohexyU)-amide: 3-Oxo-3,4-dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid (59 mg, 0.25 mmol, 1.0 eq) is added at room temperature to a stirred solution of tralphar¡ã-4-[2-(6-methoxy- [l,5]naphthyridin-3-yloxy)-ethyl]-cyclohexylamine (80 mg, 0.25 mmol, 1.0 eq) inN,N- dimethylformamide (5 mL), followed by 1-hydroxybenzotriazole (37 mg, 0.28 mmol, 1.1 eq), N-(3-dimethylaminopropyl)-N’-ethylcarbodiimide hydrochloride (56 mg, 0.29 mmol, 1.15 eq) and 7V,N-diisopropylethylamine (97 muL, 0.57 mmol, 2.25 eq). After 15 hours stirring at room temperature, solvent is evaporated and the residue is extracted with dichloromethane (3 x 10 mL) and water (10 mL). The combined organic layers are dried over sodium sulfate, filtered and concentrated to give a crude product that is purified by preparative EtaPLC to afford (3-oxo-3,4-dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid {trans-4-[2-(6- methoxy-[l,5]naphthyridin-3-yloxy)-ethyl]-cyclohexyl})-amide as a white lyophilizated powder (36 mg, 27% yield). 1H-NMR (400 MHz, DMSO-t/6) delta ppm: 10.64 (s, IH), 8.53 (d, J = 2.8 Hz, IH), 8.19 (dd, J = 0.7, 9.0 Hz, 2H), 7.62 (dd, J = 0.5, 2.5 Hz, IH), 7.37-7.46 (m, 3H), 7.07 (d, J = 9.0 Hz, IH), 4.24 (t, J = 6.6 Hz, 2H), 4.00 (s, 3H), 3.70-3.80 (m, IH), 3.50 (s, 2H), 1.80-1.90 (m, 4H), 1.70-1.80 (m, 2H), 1.45-1.55 (m, IH), 1.30-1.40 (m, 2H), 1.05-1.18 (m, 2H). MS m/z (+ESI): 493.4 [M+H]+., 272437-84-0

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid,272437-84-0,its application will become more common.

Reference£º
Patent; BASILEA PHARMACEUTICA AG; GAUCHER, Berangere; DANEL, Franck Hubert; ROUSSEL, Patrick; WO2010/84152; (2010); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 272437-84-0,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 272437-84-0

To a solution of 3-oxo-3, 4-dihydro-2H-1, 4-benzothiazin-6- carboxylic acid (3.6 g, 17 mmol) in DMF (50 ML) were added WSC (3.8 g, 20 mmol), HOBt (3.1 g, 20 mmol) and 2.0 M dimethylamine-THF solution (12.5 ML, 25 mmol), and the mixture was stirred at room temperature for 12 hrs. Saturated aqueous sodium hydrogen carbonate was poured into the reaction solution and the mixture was extracted with ethyl acetate. The extract was washed with 1N hydrochloric acid and saturated brine, dried (MGS04) and concentrated under reduced pressure. The residue was crystallized from diisopropyl ether to give the title compound as pale yellow crystals (3.6 g, yield 90%). OH NMR (300 MHz, DMSO-D6) 8 ppm: 2.91 (br, 6 H), 3.49 (s, 2 H), 6. 96-7. 00 (m, 2 H), 7. 35 (d, J = 8. 4 Hz, 1 H)., 272437-84-0

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid,272437-84-0,its application will become more common.

Reference£º
Patent; TAKEDA CHEMICAL INDUSTRIES, LTD.; WO2004/46107; (2004); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

As a common heterocyclic compound, it belong thiazines compound,2-(Trifluoromethyl)-10H-phenothiazine,92-30-8,Molecular formula: C13H8F3NS,mainly used in chemical industry, its synthesis route is as follows.,92-30-8

General procedure: Formyl chloride derivatives (7 mmol) was added to the solution ofvarious arylamines (7 mmol) in acetone (25 ml). After stirring at 60 Cfor 6 h, the reaction mixture was concentrated to remove acetone. Theresidue was purified by column chromatography with petroleum/ethylacetate (9:1) to afford the target compound 15-27 and 29-32.

With the synthetic route has been constantly updated, we look forward to future research findings about 2-(Trifluoromethyl)-10H-phenothiazine,belong thiazines compound

Reference£º
Article; Fu, Dong-Jun; Li, Miaomiao; Zhang, Sai-Yang; Li, Jiang-Feng; Sha, Beibei; Wang, Longhao; Zhang, Yan-Bing; Chen, Ping; Hu, Tao; Bioorganic Chemistry; vol. 92; (2019);,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO54,mainly used in chemical industry, its synthesis route is as follows.,92-30-8

2-Trifluoromethylphenothiazine (2.00 g, 7.4831 mmol) was placed in a 500 mL flask, THF (100 mL) dried overanhydrous K2CO3 was added, and then 60% NaH was added sequentially under N2 protection. Mineral oil(1.1973 g, 29.9323 mmol) and 1-bromo-3-chloropropane (2.9601 mL, 29.9323 mmol) were refluxed overnightat a bath temperature of 65 C. After cooling to room temperature, the reaction mixture was poured into EtOAc EtOAc (EtOAc)EtOAc. Ethylacetate (50 mL) was added to dissolve, and silica gel powder (20 g) was added to the solution to dryness, and theresidue was applied to a silica gel column, eluted with ethyl acetate and petroleum ether, and the product wascollected, dried, and dried in vacuo. Product 2-10 (4.9444 g, yield 69.8%).

With the synthetic route has been constantly updated, we look forward to future research findings about 2-(Trifluoromethyl)-10H-phenothiazine,belong thiazines compound

Reference£º
Patent; Dalian University of Technology; Li Gaoquan; Xie Aiyun; Zhang Cuifang; Chen Maofen; (23 pag.)CN104829554; (2018); B;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem