Tag: M.W:200-300

2-(Trifluoromethyl)-10H-phenothiazine, cas is 92-30-8, it is a common heterocyclic compound, the thiazines compound, its synthesis route is as follows.,92-30-8

Compound 2; 10-(3-Chloropropyl)-2-trifluoromethylphenothiazine; To a stirred solution of 2-trifluoromethyl phenothiazine (compound 1) (2g, 7.49 mmol) and sodium hydride (0.5 g, 10.42 mmol) in dry toluene (30 mL) was added l-bromo-3-chloropropane (1.57g, 10 mmol). The reaction mixture was stirred for 18 hours at 110 C under an atmosphere of argon. The solution was cooled to room temperature and poured into an ice- water mixture, the crude product was extracted with ethyl acetate (3×50 mL) and the combined organic phase dried over anhydrous sodium sulphate. Final purification was performed by column chromatography (9:1 hexane: ethyl acetate) on silica gel to give 10-(3- chloropropyl)- 2-trifluoromethylphenothiazine (1.5 g, 58% ) as a solid.

With the rapid development of chemical substances, we look forward to future research findings about 2-(Trifluoromethyl)-10H-phenothiazine

Reference£º
Patent; IMMUNE CONTROL, INC.; WO2008/27521; (2008); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

As a common heterocyclic compound, it belongs to thiazines compound, name is 2-(Trifluoromethyl)-10H-phenothiazine, and cas is 92-30-8, its synthesis route is as follows.,92-30-8

A mixture of 1-1 [2-(trifluoromethyl)-l0i7-phenothiazine] (300 mg, 1.12 mmol), 1- bromo-4-chlorobutane (391 mg, 2.28 mmol) and CS2CO3 (1.04 g, 3.19 mmol) in DMF (15 mL) was stirred at rt overnight. The mixture was poured into cool water (20 mL) and extracted with EtOAc (15 mL x 3). The combined organic extracts were washed with brine, dried over NaiSCE. fdtered and concentrated under reduced pressure. The residue was purified by column chromatography (petrol ether: EtOAc =10: 1) to provide a yellow solid (240 mg, 60% yield). LC-MS: Rt = 2.30 min; ESI, m/r 358 [M + 1] +

With the complex challenges of chemical substances, we look forward to future research findings about 92-30-8,belong thiazines compound

Reference£º
Patent; CAMP4 THERAPEUTICS CORPORATION; BUMCROT, David, A.; SEHGAL, Alfica; HERTZOG, Donald L.; (172 pag.)WO2019/195789; (2019); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

3939-23-9 A common heterocyclic compound, 3939-23-9,3-Bromo-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

To a stirred solution of 3-bromo-1OH-phenothiazine(1 8 g, 64.72 mmol) in DIVIF (100 mL) was added sodium hydride (3.8 g, 97.08 mmol) at 0 C in small portions and the reaction mixture was stirred at 0 C for 15 mins. To the reaction mixture was added 3-bromo chloropropane (12.2 g,77.66 mmol) at 0 C and stirring continued at room temperature for 1 h. The reaction wasquenched with aq.NH4C1 solution, extracted with EtOAc, organic layer is washed with brine, dried over anhydrous sodiumsulphate, and concentrated. The crude product (20 g) was as such taken for the next step without further purification: MS (ESI) m/z3 55 (M+2H)., 3939-23-9

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,3939-23-9,3-Bromo-10H-phenothiazine,its application will become more common.

Reference£º
Patent; BIOIMICS AB; KIRSEBOM, Leif; UPADHAYAYA, Ram Shankar; KETHIRI, Raghava Reddy; VIRTANEN, Anders; (308 pag.)WO2017/222466; (2017); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Name is 2-(Trifluoromethyl)-10H-phenothiazine, as a common heterocyclic compound, it belongs to thiazines compound, and cas is 92-30-8, its synthesis route is as follows.,92-30-8

General procedure: In an air atmosphere, 2-phenylindole 1a (0.60 mmol), phenothiazine 2a (0.30 mmol),10mol% cuprous bromide and DMF (2mL) were added to the Schlenk reaction tube in sequence.In a constant temperature heating magnetic stirrer, the reaction was stirred at room temperature for 24 hours.After the reaction was completed, it was quenched with distilled water, extracted with ethyl acetate (3 ¡Á 20 mL), and the organic layers were combined.After drying over anhydrous sodium sulfate and spinning the organic phase, The crude product by column chromatography to give the pure product 3a (103.1 mg, 88%).

With the complex challenges of chemical substances, we look forward to future research findings about 2-(Trifluoromethyl)-10H-phenothiazine

Reference£º
Patent; Henan Normal University; Zhao Peizheng; Wang Ke; Liu Jianming; Wang Zhixian; Shao Huibin; Yue Yuanyuan; (9 pag.)CN110407830; (2019); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 1771-18-2,2-Methoxyphenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 1771-18-2

EXAMPLE 5 Reaction of 5-methyl-2-pyrrolidinone, 2-methoxyphenothiazine and phosphorus oxychloride in 1,2-dichloroethane according to the procedure of Example 4 affords 2-METHOXY-10-[5-METHYL-1-(5-METHYL-1-PYRROLIN-2-YL)-2-PYRROLIN-2-YL]PHENOTHIAZINE HYDROCHLORIDE (8.6% yield), m.p. 236.5-238.5 C. (corr.), from ethanol-ether.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,2-Methoxyphenothiazine,1771-18-2,its application will become more common.

Reference£º
Patent; Mead Johnson & Company; US3946004; (1976); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

38642-74-9 A common heterocyclic compound, 38642-74-9,2-Cyano-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

General procedure: In an air atmosphere, 2-phenylindole 1a (0.60 mmol), phenothiazine 2a (0.30 mmol),10mol% cuprous bromide and DMF (2mL) were added to the Schlenk reaction tube in sequence.In a constant temperature heating magnetic stirrer, the reaction was stirred at room temperature for 24 hours.After the reaction was completed, it was quenched with distilled water, extracted with ethyl acetate (3 ¡Á 20 mL), and the organic layers were combined.After drying over anhydrous sodium sulfate and spinning the organic phase, The crude product by column chromatography to give the pure product 3a (103.1 mg, 88%).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,2-Cyano-phenothiazine,38642-74-9,its application will become more common.

Reference£º
Patent; Henan Normal University; Zhao Peizheng; Wang Ke; Liu Jianming; Wang Zhixian; Shao Huibin; Yue Yuanyuan; (9 pag.)CN110407830; (2019); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

92-39-7 A common heterocyclic compound, 92-39-7,2-Chloro-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

(1) Dehydration reaction: 2-chlorophenothiazine, cuprous cyanide, catalyst, quinoline, p-toluenesulfonyl chloride according to moleThe ratio is 1:1.25:0.15:5:0.1 is added to the reactor, and the temperature is raised to 120 C for dehydration reaction, the reaction is 1 hour, and the water is dehydrated to a moisture content of less than 0.1%;The catalyst is a mixture of sodium iodide and lithium iodide, and the molar ratio of sodium iodide to lithium iodide is 1:0.3;(2) Preparation of crude 2-cyanophenothiazine: the temperature of the reactor was raised to 230 C, and the reaction was carried out for 15 hours;(3) Separation of crude 2-cyanophenothiazine: the reactor temperature was lowered to 90 C, and 8 times was added to the reactor.The total amount of moles of the starting material is water, the solid is precipitated and filtered, and the product is extracted with ethyl acetate and concentrated to dryness to give a crude 2-cyanophenothiazine;(4) Purification of 2-cyanophenothiazine: a crude 2-cyanophenothiazine is placed in a mixed solvent of toluene and methanol,The volume ratio of toluene to methanol in the mixed solvent was 1:0.15, the temperature was raised to 120 C for 30 minutes, and the mixture was cooled to 20 C, and the precipitated solid was filtered to obtain 2-cyanophenothiazine.After testing, the yield of 2-cyanophenothiazine prepared in this example was 92.6%, and the purity of the product was 99.61%.The content of the amide was 0.03%.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,92-39-7,2-Chloro-10H-phenothiazine,its application will become more common.

Reference£º
Patent; Ningbo Jinuo Chemicals Co., Ltd.; Peng Zhigang; Yue Mingxin; Qu Qiangzheng; (8 pag.)CN105175355; (2018); B;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 272437-84-0,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 272437-84-0

3-Oxo-3,4-dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid (31 mg, 0.14 mmol, 1.0 eq) is added at room temperature to a stirred solution of l-(6-methoxy-3,4-dihydro-2H-l-oxa-9-aza- phenanthrene-3-yl)-piperidin-4-ylamine (50 mg, 0.14 mmol, 1.0 eq) in N,N- dimethylformamide (3 mL), followed by 1-hydroxybenzotriazole (21 mg, 0.15 mmol, 1.1 eq), N-(3-dimethylaminopropyl)-N’-ethylcarbodiimide hydrochloride (31 mg, 0.16 mmol, 1.15 eq) and NN-diisopropylethylamine (53 mu, 0.31 mmol, 2.25 eq). After 15 hours stirring at room temperature, solvent is evaporated and the residue is extracted with dichloromethane (3 x 10 mL) and water (10 mL). The combined organic layers are dried over sodium sulfate, filtered and concentrated to give a crude product that is purified by preparative HPLC to afford 3-oxo-3,4- dihydro-2H-benzo[ 1 ,4]thiazine-6-carboxylic acid [ 1 -(6-methoxy-3 ,4-dihydro-2H- 1 -oxa-9- aza-phenanthrene-3-yl)-piperidin-4-yl] -amide as an off-white lyophilizated powder (24 mg, 33% yield). 1H-NMR (400 MHz, DMSO-dtf) delta ppm: 10.66 (br, 1H), 8.33 (s, 1H), 8.24 (d, J = 7.6 Hz, 1H), 7.81 (d, J = 9.0 Hz, 1H), 7.42 (m, 2H), 7.38 (m, 1H), 7.20 (m, 2H), 4.47 (d, J = 11.0 Hz, 1H), 4.02 (m, 1H), 3.93 (s, 3H), 3.78 (m, 1H), 3.50 (s, 2H), 3.20 (m, 1H), 3.08 (m, 2H), 3.00 (m, 2H), 2.42 (m, 2H), 1.81 (m, 2H), 1.58 (m, 2H).MS m/z (+ESI): 505.2 [M+H]+.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,272437-84-0,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid,its application will become more common.

Reference£º
Patent; BASILEA PHARMACEUTICA AG; GAUCHER, Berangere; DANEL, Franck, Hubert; TANG, XiaoHu; XIE, Tong; XU, Lin; WO2011/73378; (2011); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 38642-74-9,2-Cyano-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 38642-74-9

General procedure: In an air atmosphere, 2-phenylindole 1a (0.60 mmol), phenothiazine 2a (0.30 mmol),10mol% cuprous bromide and DMF (2mL) were added to the Schlenk reaction tube in sequence.In a constant temperature heating magnetic stirrer, the reaction was stirred at room temperature for 24 hours.After the reaction was completed, it was quenched with distilled water, extracted with ethyl acetate (3 ¡Á 20 mL), and the organic layers were combined.After drying over anhydrous sodium sulfate and spinning the organic phase, The crude product by column chromatography to give the pure product 3a (103.1 mg, 88%)., 38642-74-9

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,38642-74-9,2-Cyano-phenothiazine,its application will become more common.

Reference£º
Patent; Henan Normal University; Zhao Peizheng; Wang Ke; Liu Jianming; Wang Zhixian; Shao Huibin; Yue Yuanyuan; (9 pag.)CN110407830; (2019); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 3939-23-9,3-Bromo-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 3939-23-9

Tri-tert-butylphosphine (4.4 mL of a 1.0 M solution in toluene, 1.48 g, 0.05 mmol), palladium acetate (0.4 g,1.83 mmol) and sodium tert-butoxide (52.7 g, 549 mmol) were added to 2-6-a (20.423 g, 73.42 mmol) and 2-6-c(11.53 g, 73.42 mmol) a solution in degassed toluene (500 mL), and the mixture was warmed under reflux for 2 hr.The reaction mixture was cooled to room temperature, diluted with toluene and filtered over EtOAc. Dilute the filtrate with water and use aThe benzene was extracted and the organic phases were combined and evaporated under vacuum. The residue was passed through silica gel (heptane / dichloromethane)Filtration was carried out and crystallized from isopropanol. Obtaining 2-6-b 19.51 g, yield 75%; the resulting bromide 2-6-b(7.89 g, 20 mmol), pinacol borate (6.22 g, 24 mmol), 1,1′-bis(diphenylphosphino)-ferrocene-palladium dichloride(II) dichloromethane complex (0.49 g, 0.6 mmol), potassium acetate (5.90 g, 60 mmol) and 79 ml of toluene were reacted under refluxAfter 16 hours, cool, add 26 ml of water and stir for 30 minutes.The organic phase is separated and filtered through a short bed of diatomaceous earth, followed by organicThe solvent was distilled off and the crude product was recrystallized from heptane / toluene.The compound 2-6 was obtained in an amount of 6.58 g, yield 82%.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,3939-23-9,3-Bromo-10H-phenothiazine,its application will become more common.

Reference£º
Patent; Changchun Hai Purunsi Technology Co., Ltd.; Zhang Hong; Cai Hui; (36 pag.)CN108530418; (2018); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem