Tag: M.W:200-300

A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 92-30-8

92-30-8, General procedure: To a stirred solution of phenothiazine or 2-(trifluoromethyl)-10H-phenothiazine (3 mmol) in dichloromethane (20 mL), K2CO3 (5 mmol) and propargyl bromide (5 mmol) were added carefully and the reaction mixture was refluxed for 7 h. After the reaction, the system was concentrated under vacuum, the residue was dissolved in EtOAc (40 mL) and washed by pure water and brine, and dried over anhydrous Na2SO4 and concentrated under vacuum to afford crude products 8a-8b, which were used in the next reaction without further purification.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,92-30-8,2-(Trifluoromethyl)-10H-phenothiazine,its application will become more common.

Reference£º
Article; Zhang, Jun-Xia; Guo, Jiao-Mei; Zhang, Ting-Ting; Lin, Hong-Jun; Qi, Nai-Song; Li, Zhen-Guo; Zhou, Ji-Chun; Zhang, Zhen-Zhong; Molecules; vol. 23; 6; (2018);,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 272437-84-0,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 272437-84-0

272437-84-0, Preparation of 3-oxo-3,4-dihvdro-2H-benzori,41thiazine-6-carboxylic acid (l-[2-(7- methoxy-quinoxalin-2-ylsulfanyl)-ethvH-piperidin-4-vU -methyl-amide: 3-oxo-3,4-dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid (26 mg, 0.11 mmol, 1.0 eq) is added at room temperature to a stirred solution of {l-[2-(7-methoxy-quinoxalin-2- ylsulfanyl)-ethyl]-piperidin-4-yl}-methyl-amine (40 mg, 0.11 mmol, 1.0 eq) in N,N- dimethylformamide (3 mL), followed by O-(7-azabenzotriazol-l-yl)-iV,iV,N’,N’- tetramethyluronium hexafluorophosphate (45 mg, 0.11 mmol, 1.0 eq), and triethylamine (16 muL, 0.11 mmol, 1.0 eq). After 4 hours stirring at room temperature, solvent is evaporated and the residue is purified by preparative EtaPLC to afford 3-oxo-3,4-dihydro-2H- benzo[l,4]thiazine-6-carboxylic acid {l-[2-(7-methoxy-quinoxalin-2-ylsulfanyl)-ethyl]- piperidin-4-yl} -methyl-amide as a yellow solid (22 mg, 35% yield).MS m/z (+ESI): 524.3 [M+Eta]”

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid,272437-84-0,its application will become more common.

Reference£º
Patent; BASILEA PHARMACEUTICA AG; GAUCHER, Berangere; DANEL, Franck Hubert; ROUSSEL, Patrick; WO2010/84152; (2010); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 188614-01-9,Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 188614-01-9

At 40 in to methyl-3-oxo-3,4-dihydro -2H-1,4- benzothiazine-6-carboxylate (475mg, 2.00mmol), borohydride the mixture of sodium (151mg, 3.99mmol) in tetrahydrofuran (2.0mL) dropwise addition of methanol (640mg). After stirring for 1 hour at 40 , under ice-cooling, use 1mol / L diluted hydrochloric acid, and extracted with ethyl acetate. The combined organic layers were dried over sodium sulfate, filtered, concentrated, and the use of silica gel column chromatography (hexane: ethyl acetate = 1: 1) and the residue was purified to obtain the title compound (130mg, 31%) .

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,188614-01-9,Methyl 3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate,its application will become more common.

Reference£º
Patent; SUMITOMO DAINIPPON PHARMA CO., LTD.; YOSHINAGA, HIDEFUMI; URUNO, YOSHIHARU; SAWAMURA, KIYOTO; GOTO, NANA; IKUMA, YOHEI; (165 pag.)TW2016/5858; (2016); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 92-30-8

1 -Bromo-3-chloropropane (37.68 g, 200 mmol) was added to 2-(trifluoromethyl)- l0i7-phenothiazine (26.7 g, 100 mmol) and Cs2CC>3 (65.6 g, 200 mmol) in DMF (130 mL). The mixture was stirred at 30 C for 48 h and then heated to 80 C for 2 h. The mixture was cooled to rt then H20 was added. The mixture was extracted with PE three times (200 mL x 3). The combined organic phase was washed with brine, dried over Na2S04, and concentrated in vacuo. The residue was purified by column chromatography (PE 100%, PE:EtOAc = 60: 1) to get 10.8 g pure and 19 g crude. LC-MS: Rt = 2.29 min; ESI, m/z 344 [M+l]+.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,92-30-8,2-(Trifluoromethyl)-10H-phenothiazine,its application will become more common.

Reference£º
Patent; CAMP4 THERAPEUTICS CORPORATION; BUMCROT, David, A.; SEHGAL, Alfica; HERTZOG, Donald L.; (172 pag.)WO2019/195789; (2019); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 92-30-8

Compound 21; 10-(4-chlorobutyl)-2-trifluoromethylphenothiazine; To a stirred solution of 2-trifluoromethylphenothiazine 1 (4.Og, 15 mmol), sodium hydride (1.2g, 24 mmol) in dry toluene (40 mL), 1-bromo 4- chlorobutane (3.0 g, 17.6 mmol) was added. The reaction mixture was stirred for 18 hours at 110 C under an atmosphere of argon. The solution was cooled to room temperature and poured into an ice-water mixture. The crude product was extracted with ethyl acetate (3chi50mL) and the organic phase was dried over sodium sulphate. Final purification was performed by column chromatography (9: 1 hexane: ethyl acetate) on silica gel to give 21 (3.5 g, 65% ) as an oil., 92-30-8

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,2-(Trifluoromethyl)-10H-phenothiazine,92-30-8,its application will become more common.

Reference£º
Patent; IMMUNE CONTROL, INC.; WO2008/27521; (2008); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 92-30-8

General procedure: A stirred mixture of phenothiazine (100 mg, 0.5 mmol),3,5-dimethylphenol (183 mg, 1.5 mmol), and K2CO3 (69 mg,0.5 mmol) in ODCB (1.5 mL) was heated to 130 oC for 6 h under O2 balloon atmosphere. After the usual aqueous extractive workup and column chromatographic purification process (hexanes/EtOAc, 20:1) para-3a (103 mg, 64%) and ortho-3a (34 mg, 21%) were obtained as white solids. Other compounds were synthesized similarly, and the spectroscopic data of 3a-3m and the sulfoxide of 3g are as follows.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,2-(Trifluoromethyl)-10H-phenothiazine,92-30-8,its application will become more common.

Reference£º
Article; Yu, Jin; Moon, Hye Ran; Kim, Su Yeon; Kim, Jae Nyoung; Bulletin of the Korean Chemical Society; vol. 36; 11; (2015); p. 2765 – 2768;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 92-30-8

General procedure: Phenothiazine 1 (5g, 25.09mmol) was taken in anhydrous N, N-dimethyl formamide (DMF) (50mL) in a dry round bottom flask. Sodium hydride (2g, 50.18mmol) was added under nitrogen condition at 0C and stirred for 30min at room temperature. Methyl iodide (3.4mL, 50.18mmol) was added and continued the stirring for 8h. After that, the reaction mixture (monitored by TLC) was quenched with ice cold water (150mL). The separated solid was filtered off, dried and used as such for the next step.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,92-30-8,2-(Trifluoromethyl)-10H-phenothiazine,its application will become more common.

Reference£º
Article; Reddyrajula, Rajkumar; Dalimba, Udayakumar; Madan Kumar; European Journal of Medicinal Chemistry; vol. 168; (2019); p. 263 – 282;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

98827-44-2 A common heterocyclic compound, 98827-44-2,Methyl 4-hydroxy-2H-thieno[2,3-e][1,2]thiazine-3-carboxylate 1,1-dioxide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

260 kg of 4-hydroxy-2H-thieno [2,3-e] -1,2-thiazine-3-carboxylic acid methyl ester 1,1-dioxide were dissolved in500kgDMF, add potassium carbonate 150kg, warmed to 140 C, and dropping 120kg of dimethyl carbonate, 2h drop end, after the dropwise addition, the reaction was continued for 5h, then add 140kg of potassium carbonate, dropping 300 kg of 2 – aminopyridine in dimethylformamide (DMF) (120kg 2-aminopyridine dissolved in 180 kg DMF), 2h addition was complete, the reaction was continued for 5h. After the reaction, cooling and filtering to remove potassium carbonate, the filtrate was recovered under reduced pressure most of the DMF, the residue was added mass concentration of 3% sodium hydroxide alkaline water, activated carbon bleaching, filtration, the filtrate was purified hydrochloric acid to pH = 3 -4, precipitated yellowish solid, centrifuged, the material was washed until neutral, dried, to give a yellow solid 276kg, yield 83%, product purity 99.85%.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,98827-44-2,Methyl 4-hydroxy-2H-thieno[2,3-e][1,2]thiazine-3-carboxylate 1,1-dioxide,its application will become more common.

Reference£º
Patent; Jiangsu Engineering Polytechnic College; Yan Bin; Feng Chengliang; Guo Liqiang; (5 pag.)CN106916169; (2017); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

272437-84-0 A common heterocyclic compound, 272437-84-0,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Preparation of 3-oxo-3,4-dihydro-2H-benzo[l,41thiazine-6-carboxylic acid [tra/? -4-(8- methoxy-l,2-dihydro-3-oxa-5,9-diaza-cyclopenta[alnaphthalen-2-ylmethyl)-cyclohexyll- amide:3-Oxo-3,4-dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid (31 mg, 0.14 mmol, 1.0 eq) is added at room temperature to a stirred solution of tra?s-4-(8-methoxy-l,2-dihydro-3-oxa-5,9- diaza-cyclopenta[a]naphthalen-2-ylmethyl)-cyclohexylamine (47 mg, 0.14 mmol, 1.0 eq) in N,N-dimethylformamide (4 mL), followed by 1-hydroxybenzotriazole (24 mg, 0.16 mmol, 1.1 eq), N-(3-dimethylaminopropyl)-N’-ethylcarbodiimide hydrochloride (32 mg, 0.16 mmol, 1.15 eq) and NN-diisopropylethylamine (56 mu, 0.32 mmol, 2.25 eq). After 15 hours stirring at room temperature, solvent is evaporated and the residue is extracted with dichloromethane (3 x 10 mL) and water (10 mL). The combined organic layers are dried over sodium sulfate, filtered and concentrated to give a crude product that is purified by preparative HPLC to afford 3-oxo-3,4- dihydro-2H-benzo[l,4]thiazine-6-carboxylic acid [tra?s-4-(8-methoxy-l,2-dihydro-3-oxa- – -5,9-diaza-cyclopenta[a]naphthalen-2-ylmethyl)-cyclohexyl]-amide as a white lyophilized powder (16 mg, 21% yield).1H-NMR (400 MHz, DMSO- 6) delta ppm: 10.67 (s, 1H), 8.49 (s, 1H), 8.23 (d, J = 7.9 Hz, 1H), 8.19 (d, J = 9.0 Hz, 1H), 7.44 (m, 3H), 7.06 (d, J = 9.1 Hz, 1H), 5.21 (m, 1H), 4.01 (s, 3H), 3.74 (m, 2H), 3.51 (s, 2H), 3.14 (dd, J = 7.9, 16.8 Hz, 1H), 1.80-2.00 (m, 5H), 1.66 (m, 1H), 1.57 (m, 1H), 1.39 (m, 2H), 1.13 (m, 2H).MS m/z (+ESI): 505.5 [M+H]+.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,3-Oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylic acid,272437-84-0,its application will become more common.

Reference£º
Patent; BASILEA PHARMACEUTICA AG; GAUCHER, Berangere; DANEL, Franck Hubert; XIE, Tong; XU, Lin; WO2012/171860; (2012); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 92-30-8

Step a 4-(3′-indolyl)-1-[1″-(2′”-trifluoromethyl-10′”-phenothiazinyl)-2″-methyl-3″-propionyl]-piperidine hydrochloride 27 g of 2-trifluoromethyl-phenothiazine and 12 g of alpha-methylacryloyl chloride in 100 ml of toluene were 1 for 2 hours and the mixture was evaporated to dryness. The residue was chromatographed over silica gel and elution with a 1– 1 benzene-cyclohexane mixture gave 18 g of 2-trifluoromethyl-10-(alpha-methyl acryloyl)-phenothiazine in the form of white crystals melting at 103¡ãC.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,2-(Trifluoromethyl)-10H-phenothiazine,92-30-8,its application will become more common.

Reference£º
Patent; Roussel-UCLAF; US3988453; (1976); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem