92-30-8| Page 20 of 28 | Heterocyclic Building Blocks-Thiazines

The origin of a common compound about 92-30-8

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,92-30-8,2-(Trifluoromethyl)-10H-phenothiazine,its application will become more common.

A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 92-30-8

92-30-8, To a mixture of 2-(trifluoromethyl)-l0i7-phenothiazine (5.0 g, 18.726 mmol) and NaH (0.674 g, 28.09 mmol) in DMF (50 mL) was added 2-(bromomethyl)oxirane (3.8 g, 28.09 mmol) at 0 C. The mixture was allowed to slowly warm to rt and was stirred at room temperature overnight. Then the mixture was added to water (100 mL) and extracted with EtOAc (100 mL x 3). The combined organic layers were washed with brine (30 mL), dried over sodium sulfate, and concentrated to dryness. The residue was purified by column chromatography on silica gel (PE/EtOAc = 8/1) to afford compound 2-1 (4.5 g, 75% yield) as a white solid. ‘H NMR (400 MHz, Patent; CAMP4 THERAPEUTICS CORPORATION; BUMCROT, David, A.; SEHGAL, Alfica; HERTZOG, Donald L.; (172 pag.)WO2019/195789; (2019); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Some scientific research about 2-(Trifluoromethyl)-10H-phenothiazine

92-30-8 A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Compound 27; 10-[2-(N-Boc-4-piperidyl)ethyl]-2-trifluoromethylphenothiazine; To a stirred solution of 2-trifluoromethylphenothizine 1 (0.9 Ig, 3.42 mmol), sodium hydride (0.2g, 4.0 mmol) in DME (20 mL) at 90¡ãC was added N-Boc- 4-(2-bromoethyl)piperidine 26 (1.Og, 3.42 mmol) dropwise under an atmosphere of argon. The reaction mixture was stirred for 12h at reflux temperature. The reaction mixture was filtered, and filtrate was concentrated under vacuum. The residue was partitioned between ethyl acetate (25 mL) and brine (1OmL). The organic layer was dried over anhydrous sodium sulphate, filtered, and evaporated. The resulting residue was purified by column chromatography (8:2 n-hexane : ethyl acetate) on silica gel to give phenothiazine derivative 27 (0.3 g, 18percent) as a foam. MS(ESI): m/z 479(M+H).

Reference£º
Patent; IMMUNE CONTROL, INC.; WO2008/27521; (2008); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

The origin of a common compound about 92-30-8

General procedure: Formyl chloride derivatives (7 mmol) was added to the solution ofvarious arylamines (7 mmol) in acetone (25 ml). After stirring at 60 Cfor 6 h, the reaction mixture was concentrated to remove acetone. Theresidue was purified by column chromatography with petroleum/ethylacetate (9:1) to afford the target compound 15-27 and 29-32.

Reference£º
Article; Fu, Dong-Jun; Li, Miaomiao; Zhang, Sai-Yang; Li, Jiang-Feng; Sha, Beibei; Wang, Longhao; Zhang, Yan-Bing; Chen, Ping; Hu, Tao; Bioorganic Chemistry; vol. 92; (2019);,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Some scientific research about 2-(Trifluoromethyl)-10H-phenothiazine

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,2-(Trifluoromethyl)-10H-phenothiazine,92-30-8,its application will become more common.

A solution of2- (trifluoromethyl)-lOH-phenothiazine (2.04g, 7.6mmol) and DMF (16mL) was mixed with CS2C03 (7.5g, 22.9mmol) and l-bromo-3-chloropropane (1.1 mL, 11.5mmol). The reaction mixture was heated at 65 C for 12h. Once no starting material was observed by analytical LCMS, EtOAC (250mL) and brine (250mL) were added. The organic layer was separated, and the aqueous layer was washed with EtOAC (3 chi l00mL). The combined organic extracts were washed with brine (2 chi lOOmL), dried over MgSO iota, and concentrated to afford the title compound.

Reference£º
Patent; INCEPTION 1, INC.; CHEN, Austin, Chih-Yu; SCOTT, Jill, Melissa; STEARNS, Brian, Andrew; STOCK, Nicholas, Simon; TRUONG, Yen, Pham; WO2013/43744; (2013); A2;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Some scientific research about 2-(Trifluoromethyl)-10H-phenothiazine

General procedure: To a mixture of sodium hydride suspension (60percent, 0.26 g, 6.67 mmol) and phenothiazine derivative in abs. THF (50 cm3) was added the appropriate 3-aryltetrazolo[1,5-a]pyridin-4-ium tetrafluoroborate (1) in portions over 20 min, and the mixture was stirred at room temperature for 2 days. After evaporation of the reaction mixture, the residue was dissolved in a 1:1 mixture of EtOAc:water (50 cm3) and the solid product was filtered off. The aqueous mother liquor was extracted with EtOAc (thrice) and the organic phase was dried over anhydrous Na2SO4, filtered and evaporated. The combined organic solvent was evaporated, the residue was washed with diethyl ether then it was recrystallized from ethyl acetate – unless otherwise stated – to give the product.

Reference£º
Article; Taka?cs, Daniella; Nagy, Ildiko?; Bombicz, Petra; Egyed, Orsolya; Jemnitz, Katalin; Riedl, Zsuzsanna; Molna?r, Jo?zsef; Amaral, Leonard; Hajo?s, Gyo?rgy; Bioorganic and Medicinal Chemistry; vol. 20; 14; (2012); p. 4258 – 4270;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Some scientific research about 2-(Trifluoromethyl)-10H-phenothiazine

92-30-8, General procedure: To a mixture of sodium hydride suspension (60percent, 0.26 g, 6.67 mmol) and phenothiazine derivative in abs. THF (50 cm3) was added the appropriate 3-aryltetrazolo[1,5-a]pyridin-4-ium tetrafluoroborate (1) in portions over 20 min, and the mixture was stirred at room temperature for 2 days. After evaporation of the reaction mixture, the residue was dissolved in a 1:1 mixture of EtOAc:water (50 cm3) and the solid product was filtered off. The aqueous mother liquor was extracted with EtOAc (thrice) and the organic phase was dried over anhydrous Na2SO4, filtered and evaporated. The combined organic solvent was evaporated, the residue was washed with diethyl ether then it was recrystallized from ethyl acetate – unless otherwise stated – to give the product.

New downstream synthetic route of 92-30-8

A new synthetic route of 92-30-8

II-4 (20g, 75mmol) a 100mL reaction flask was added DMF (60mL) was stirred and dissolved, was added potassium carbonate (15.5g, 113mmol), stirred at 60¡ãC , portionwise Intermediate III-5 (17.5g , 79mmol), the reaction after 1h, TLC analysis showed completion of the reaction (developing solvent, ethyl acetate: petroleum ether = 1: 3). The reaction solution was poured into 200ml cold water, with stirring, solid precipitated out.Filter cake was washed with water, and dried to give brown crude solid.The crude product was recrystallized from ethanol to give slightly yellow solid 30.0g. Purity 98.8percent (HPLC normalization method), a yield of 88.3percent.ESI-MS ([M + H] +): 453.0.

Reference£º
Patent; Tianjin Pharmaceutical Institute Co., Ltd.; Liu Ying; Liu Dengke; Mu Shuai; Yue Nan; Gong Min; Zhi Shuang; Liu Changxiao; (25 pag.)CN104230848; (2017); B;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Some scientific research about 2-(Trifluoromethyl)-10H-phenothiazine

Compound 2; 10-(3-Chloropropyl)-2-trifluoromethylphenothiazine; To a stirred solution of 2-trifluoromethyl phenothiazine (compound 1) (2g, 7.49 mmol) and sodium hydride (0.5 g, 10.42 mmol) in dry toluene (30 mL) was added l-bromo-3-chloropropane (1.57g, 10 mmol). The reaction mixture was stirred for 18 hours at 110 C under an atmosphere of argon. The solution was cooled to room temperature and poured into an ice- water mixture, the crude product was extracted with ethyl acetate (3×50 mL) and the combined organic phase dried over anhydrous sodium sulphate. Final purification was performed by column chromatography (9:1 hexane: ethyl acetate) on silica gel to give 10-(3- chloropropyl)- 2-trifluoromethylphenothiazine (1.5 g, 58% ) as a solid.

Reference£º
Patent; IMMUNE CONTROL, INC.; WO2008/27521; (2008); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

The origin of a common compound about 2-(Trifluoromethyl)-10H-phenothiazine

To a mixture of 2-(trifluoromethyl)-l0i7-phenothiazine (5.0 g, 18.726 mmol) and NaH (0.674 g, 28.09 mmol) in DMF (50 mL) was added 2-(bromomethyl)oxirane (3.8 g, 28.09 mmol) at 0 C. The mixture was allowed to slowly warm to rt and was stirred at room temperature overnight. Then the mixture was added to water (100 mL) and extracted with EtOAc (100 mL x 3). The combined organic layers were washed with brine (30 mL), dried over sodium sulfate, and concentrated to dryness. The residue was purified by column chromatography on silica gel (PE/EtOAc = 8/1) to afford compound 2-1 (4.5 g, 75% yield) as a white solid. ‘H NMR (400 MHz, Patent; CAMP4 THERAPEUTICS CORPORATION; BUMCROT, David, A.; SEHGAL, Alfica; HERTZOG, Donald L.; (172 pag.)WO2019/195789; (2019); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem