Category: 92-30-8

92-30-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2-(Trifluoromethyl)-10H-phenothiazine, cas is 92-30-8,the thiazines compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a solution of hydroxy compounds, sulfhydryl compounds oramino compounds (1.0 eq) and propargyl bromide (1.2 eq) inacetone (20 ml) was added NaOH (1.5 eq), the mixturewas refluxedfor about 6 h. Upon completion, the residue was purified withcolumn chromatography (hexane:EtOAc 7:1) to obtain analogue13a~13m. Sulfonyl chlorides (1.0 eq) and propynylamine (1.2 eq) inCH2Cl2 (20 ml) was added Et3N (1.5 eq), the mixture was stirred atroom temperature for about 6 h. Upon completion, the residue waspurified with column chromatography (hexane:EtOAc 9:1) toobtain analogue 13n~13o.

The chemical industry reduces the impact on the environment during synthesis,92-30-8,2-(Trifluoromethyl)-10H-phenothiazine,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Fu, Dong-Jun; Li, Ping; Wu, Bo-Wen; Cui, Xin-Xin; Zhao, Cheng-Bin; Zhang, Sai-Yang; European Journal of Medicinal Chemistry; vol. 165; (2019); p. 309 – 322;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

92-30-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2-(Trifluoromethyl)-10H-phenothiazine, cas is 92-30-8,the thiazines compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a mixture of sodium hydride suspension (60percent, 0.26 g, 6.67 mmol) and phenothiazine derivative in abs. THF (50 cm3) was added the appropriate 3-aryltetrazolo[1,5-a]pyridin-4-ium tetrafluoroborate (1) in portions over 20 min, and the mixture was stirred at room temperature for 2 days. After evaporation of the reaction mixture, the residue was dissolved in a 1:1 mixture of EtOAc:water (50 cm3) and the solid product was filtered off. The aqueous mother liquor was extracted with EtOAc (thrice) and the organic phase was dried over anhydrous Na2SO4, filtered and evaporated. The combined organic solvent was evaporated, the residue was washed with diethyl ether then it was recrystallized from ethyl acetate – unless otherwise stated – to give the product.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 2-(Trifluoromethyl)-10H-phenothiazine, 92-30-8

Reference£º
Article; Taka?cs, Daniella; Nagy, Ildiko?; Bombicz, Petra; Egyed, Orsolya; Jemnitz, Katalin; Riedl, Zsuzsanna; Molna?r, Jo?zsef; Amaral, Leonard; Hajo?s, Gyo?rgy; Bioorganic and Medicinal Chemistry; vol. 20; 14; (2012); p. 4258 – 4270;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

92-30-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2-(Trifluoromethyl)-10H-phenothiazine, cas is 92-30-8,the thiazines compound, it is a common compound, a new synthetic route is introduced below.

Step a 4-(3′-indolyl)-1-[1″-(2′”-trifluoromethyl-10′”-phenothiazinyl)-2″-methyl-3″-propionyl]-piperidine hydrochloride 27 g of 2-trifluoromethyl-phenothiazine and 12 g of alpha-methylacryloyl chloride in 100 ml of toluene were 1 for 2 hours and the mixture was evaporated to dryness. The residue was chromatographed over silica gel and elution with a 1– 1 benzene-cyclohexane mixture gave 18 g of 2-trifluoromethyl-10-(alpha-methyl acryloyl)-phenothiazine in the form of white crystals melting at 103¡ãC.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 2-(Trifluoromethyl)-10H-phenothiazine, 92-30-8

Reference£º
Patent; Roussel-UCLAF; US3988453; (1976); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

As a common heterocyclic compound, it belongs to thiazines compound, name is 2-(Trifluoromethyl)-10H-phenothiazine, and cas is 92-30-8, its synthesis route is as follows.

Compound 21; 10-(4-chlorobutyl)-2-trifluoromethylphenothiazine; To a stirred solution of 2-trifluoromethylphenothiazine 1 (4.Og, 15 mmol), sodium hydride (1.2g, 24 mmol) in dry toluene (40 mL), 1-bromo 4- chlorobutane (3.0 g, 17.6 mmol) was added. The reaction mixture was stirred for 18 hours at 110 C under an atmosphere of argon. The solution was cooled to room temperature and poured into an ice-water mixture. The crude product was extracted with ethyl acetate (3chi50mL) and the organic phase was dried over sodium sulphate. Final purification was performed by column chromatography (9: 1 hexane: ethyl acetate) on silica gel to give 21 (3.5 g, 65% ) as an oil.

92-30-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,92-30-8 ,2-(Trifluoromethyl)-10H-phenothiazine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; IMMUNE CONTROL, INC.; WO2008/27521; (2008); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Name is 2-(Trifluoromethyl)-10H-phenothiazine, as a common heterocyclic compound, it belongs to thiazines compound, and cas is 92-30-8, its synthesis route is as follows.

General procedure: Phenothiazine 1 (5g, 25.09mmol) was taken in anhydrous N, N-dimethyl formamide (DMF) (50mL) in a dry round bottom flask. Sodium hydride (2g, 50.18mmol) was added under nitrogen condition at 0C and stirred for 30min at room temperature. Methyl iodide (3.4mL, 50.18mmol) was added and continued the stirring for 8h. After that, the reaction mixture (monitored by TLC) was quenched with ice cold water (150mL). The separated solid was filtered off, dried and used as such for the next step.

92-30-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,92-30-8 ,2-(Trifluoromethyl)-10H-phenothiazine, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Reddyrajula, Rajkumar; Dalimba, Udayakumar; Madan Kumar; European Journal of Medicinal Chemistry; vol. 168; (2019); p. 263 – 282;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

92-30-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2-(Trifluoromethyl)-10H-phenothiazine, cas is 92-30-8,the thiazines compound, it is a common compound, a new synthetic route is introduced below.

A solution of2- (trifluoromethyl)-lOH-phenothiazine (2.04g, 7.6mmol) and DMF (16mL) was mixed with CS2C03 (7.5g, 22.9mmol) and l-bromo-3-chloropropane (1.1 mL, 11.5mmol). The reaction mixture was heated at 65 C for 12h. Once no starting material was observed by analytical LCMS, EtOAC (250mL) and brine (250mL) were added. The organic layer was separated, and the aqueous layer was washed with EtOAC (3 chi l00mL). The combined organic extracts were washed with brine (2 chi lOOmL), dried over MgSO iota, and concentrated to afford the title compound.

The chemical industry reduces the impact on the environment during synthesis,92-30-8,2-(Trifluoromethyl)-10H-phenothiazine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; INCEPTION 1, INC.; CHEN, Austin, Chih-Yu; SCOTT, Jill, Melissa; STEARNS, Brian, Andrew; STOCK, Nicholas, Simon; TRUONG, Yen, Pham; WO2013/43744; (2013); A2;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

As a common heterocyclic compound, it belongs to thiazines compound, name is 2-(Trifluoromethyl)-10H-phenothiazine, and cas is 92-30-8, its synthesis route is as follows.

General procedure: Formyl chloride derivatives (7 mmol) was added to the solution ofvarious arylamines (7 mmol) in acetone (25 ml). After stirring at 60 Cfor 6 h, the reaction mixture was concentrated to remove acetone. Theresidue was purified by column chromatography with petroleum/ethylacetate (9:1) to afford the target compound 15-27 and 29-32.

92-30-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,92-30-8 ,2-(Trifluoromethyl)-10H-phenothiazine, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Fu, Dong-Jun; Li, Miaomiao; Zhang, Sai-Yang; Li, Jiang-Feng; Sha, Beibei; Wang, Longhao; Zhang, Yan-Bing; Chen, Ping; Hu, Tao; Bioorganic Chemistry; vol. 92; (2019);,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

As a common heterocyclic compound, it belongs to thiazines compound, name is 2-(Trifluoromethyl)-10H-phenothiazine, and cas is 92-30-8, its synthesis route is as follows.

Compound 13; 10-[3-(N-Boc-4-piperidyl)propyl]-2-trifluoromethylphenothiazine; To a stirred solution of 2-trifluoromethylphenothizine 1 (400 mg, 1.5 mmol), sodium hydride (100 mg, 2 mmol) in DME (10 mL) at 90 C was added N- Boc-4-(3-bromopropyl)piperidine 12 (380 mg, 1.24 mmol) dropwise under an atmosphere of argon. The reaction mixture was stirred for 12h at reflux. The reaction mixture was filtered and the filtrate was concentrated under vacuum. The residue was partitioned between ethyl acetate (25 mL) and brine (1OmL). The organic layer was dried over anhydrous sodium sulphate, filtered, and evaporated. The resulting residue was purified by silica gel column chromatography (8:2 hexane : ethyl acetate) on silica gel to give phenothiazine derivative 13 (425 mg, 70percent) as a solid. MS(ESI): m/z493 (M+H).

92-30-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,92-30-8 ,2-(Trifluoromethyl)-10H-phenothiazine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; IMMUNE CONTROL, INC.; WO2008/27521; (2008); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

92-30-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2-(Trifluoromethyl)-10H-phenothiazine, cas is 92-30-8,the thiazines compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A stirred mixture of phenothiazine (100 mg, 0.5 mmol),3,5-dimethylphenol (183 mg, 1.5 mmol), and K2CO3 (69 mg,0.5 mmol) in ODCB (1.5 mL) was heated to 130 oC for 6 h under O2 balloon atmosphere. After the usual aqueous extractive workup and column chromatographic purification process (hexanes/EtOAc, 20:1) para-3a (103 mg, 64percent) and ortho-3a (34 mg, 21percent) were obtained as white solids. Other compounds were synthesized similarly, and the spectroscopic data of 3a-3m and the sulfoxide of 3g are as follows.

The chemical industry reduces the impact on the environment during synthesis,92-30-8,2-(Trifluoromethyl)-10H-phenothiazine,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Yu, Jin; Moon, Hye Ran; Kim, Su Yeon; Kim, Jae Nyoung; Bulletin of the Korean Chemical Society; vol. 36; 11; (2015); p. 2765 – 2768;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

It is a common heterocyclic compound, the thiazines compound, 2-(Trifluoromethyl)-10H-phenothiazine, cas is 92-30-8 its synthesis route is as follows.

After dissolving 2-(trifluoromethyl)-10H-phenothiazine (2.0 g, 7.48 mmol) in N,N-dimethylformamide (2 mL), 60% sodium hydride (149.70 mg, 3.74 mmol) and 1-bromo-4-chlorobutane (1.16 mL, 10.10 mmol) were added at 0 C. The reactants were heated at 100 C. for 12 hours under reflux. After the reaction was completed, the reaction solution was extracted with ethyl acetate and the organic layer was dried with magnesium sulfate, filtered under reduced pressure and then concentrated under reduced pressure. The target compound (1.52 g) was obtained with a yield of 56.72% by separating the residue by chromatography (ethyl acetate/n-hexane=1/20). 1H NMR (400 MHz, CDCl3): delta 1.89-2.00 (4H, m, 2CH2), 3.40 (1H, t, J=6.02 Hz, CH), 3.54 (1H, t, 6.18 Hz, CH), 3.94 (2H, t, 6.02 Hz, CH2), 6.89 (1H, d, J=8.12 Hz, CH), 6.96 (1H, t, 7.44 Hz, CH) 7.03 (1H, s, CH), 7.13-7.17 (2H, m, 2CH), 7.21 (2H, t, 8.16 Hz, 2CH).

92-30-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,92-30-8 ,2-(Trifluoromethyl)-10H-phenothiazine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Korea Institute of Science and Technology; Roh, Eun Joo; Jeon, Bo Ra Mi; Lee, Chang Joon; Hong, Jin Pyo; Jeong, Joo Yeon; Kang, Sang Soo; (28 pag.)US10035795; (2018); B1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem