Category: 92-30-8

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, as follows.92-30-8

General procedure: In an air atmosphere, 2-phenylindole 1a (0.60 mmol), phenothiazine 2a (0.30 mmol),10mol% cuprous bromide and DMF (2mL) were added to the Schlenk reaction tube in sequence.In a constant temperature heating magnetic stirrer, the reaction was stirred at room temperature for 24 hours.After the reaction was completed, it was quenched with distilled water, extracted with ethyl acetate (3 ¡Á 20 mL), and the organic layers were combined.After drying over anhydrous sodium sulfate and spinning the organic phase, The crude product by column chromatography to give the pure product 3a (103.1 mg, 88%).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 2-(Trifluoromethyl)-10H-phenothiazine, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Henan Normal University; Zhao Peizheng; Wang Ke; Liu Jianming; Wang Zhixian; Shao Huibin; Yue Yuanyuan; (9 pag.)CN110407830; (2019); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.92-30-8

Compound 21; 10-(4-chlorobutyl)-2-trifluoromethylphenothiazine; To a stirred solution of 2-trifluoromethylphenothiazine 1 (4.Og, 15 mmol), sodium hydride (1.2g, 24 mmol) in dry toluene (40 mL), 1-bromo 4- chlorobutane (3.0 g, 17.6 mmol) was added. The reaction mixture was stirred for 18 hours at 110 C under an atmosphere of argon. The solution was cooled to room temperature and poured into an ice-water mixture. The crude product was extracted with ethyl acetate (3chi50mL) and the organic phase was dried over sodium sulphate. Final purification was performed by column chromatography (9: 1 hexane: ethyl acetate) on silica gel to give 21 (3.5 g, 65% ) as an oil.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 2-(Trifluoromethyl)-10H-phenothiazine, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; IMMUNE CONTROL, INC.; WO2008/27521; (2008); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

92-30-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, it is a common compound, a new synthetic route is introduced below.

Step a 4-(3′-indolyl)-1-[1″-(2′”-trifluoromethyl-10′”-phenothiazinyl)-2″-methyl-3″-propionyl]-piperidine hydrochloride 27 g of 2-trifluoromethyl-phenothiazine and 12 g of alpha-methylacryloyl chloride in 100 ml of toluene were 1 for 2 hours and the mixture was evaporated to dryness. The residue was chromatographed over silica gel and elution with a 1– 1 benzene-cyclohexane mixture gave 18 g of 2-trifluoromethyl-10-(alpha-methyl acryloyl)-phenothiazine in the form of white crystals melting at 103¡ãC.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 92-30-8, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; Roussel-UCLAF; US3988453; (1976); A;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

92-30-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, it is a common compound, a new synthetic route is introduced below.

Compound 13; 10-[3-(N-Boc-4-piperidyl)propyl]-2-trifluoromethylphenothiazine; To a stirred solution of 2-trifluoromethylphenothizine 1 (400 mg, 1.5 mmol), sodium hydride (100 mg, 2 mmol) in DME (10 mL) at 90 C was added N- Boc-4-(3-bromopropyl)piperidine 12 (380 mg, 1.24 mmol) dropwise under an atmosphere of argon. The reaction mixture was stirred for 12h at reflux. The reaction mixture was filtered and the filtrate was concentrated under vacuum. The residue was partitioned between ethyl acetate (25 mL) and brine (1OmL). The organic layer was dried over anhydrous sodium sulphate, filtered, and evaporated. The resulting residue was purified by silica gel column chromatography (8:2 hexane : ethyl acetate) on silica gel to give phenothiazine derivative 13 (425 mg, 70percent) as a solid. MS(ESI): m/z493 (M+H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 2-(Trifluoromethyl)-10H-phenothiazine reaction routes.

Reference£º
Patent; IMMUNE CONTROL, INC.; WO2008/27521; (2008); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

92-30-8 A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

After dissolving 2-(trifluoromethyl)-10H-phenothiazine (2.0 g, 7.48 mmol) in N,N-dimethylformamide (2 mL), 60% sodium hydride (149.70 mg, 3.74 mmol) and 1-bromo-4-chlorobutane (1.16 mL, 10.10 mmol) were added at 0 C. The reactants were heated at 100 C. for 12 hours under reflux. After the reaction was completed, the reaction solution was extracted with ethyl acetate and the organic layer was dried with magnesium sulfate, filtered under reduced pressure and then concentrated under reduced pressure. The target compound (1.52 g) was obtained with a yield of 56.72% by separating the residue by chromatography (ethyl acetate/n-hexane=1/20). 1H NMR (400 MHz, CDCl3): delta 1.89-2.00 (4H, m, 2CH2), 3.40 (1H, t, J=6.02 Hz, CH), 3.54 (1H, t, 6.18 Hz, CH), 3.94 (2H, t, 6.02 Hz, CH2), 6.89 (1H, d, J=8.12 Hz, CH), 6.96 (1H, t, 7.44 Hz, CH) 7.03 (1H, s, CH), 7.13-7.17 (2H, m, 2CH), 7.21 (2H, t, 8.16 Hz, 2CH).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 92-30-8 reaction routes.

Reference£º
Patent; Korea Institute of Science and Technology; Roh, Eun Joo; Jeon, Bo Ra Mi; Lee, Chang Joon; Hong, Jin Pyo; Jeong, Joo Yeon; Kang, Sang Soo; (28 pag.)US10035795; (2018); B1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.92-30-8

General procedure: To a mixture of sodium hydride suspension (60percent, 0.26 g, 6.67 mmol) and phenothiazine derivative in abs. THF (50 cm3) was added the appropriate 3-aryltetrazolo[1,5-a]pyridin-4-ium tetrafluoroborate (1) in portions over 20 min, and the mixture was stirred at room temperature for 2 days. After evaporation of the reaction mixture, the residue was dissolved in a 1:1 mixture of EtOAc:water (50 cm3) and the solid product was filtered off. The aqueous mother liquor was extracted with EtOAc (thrice) and the organic phase was dried over anhydrous Na2SO4, filtered and evaporated. The combined organic solvent was evaporated, the residue was washed with diethyl ether then it was recrystallized from ethyl acetate – unless otherwise stated – to give the product.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 2-(Trifluoromethyl)-10H-phenothiazine.

Reference£º
Article; Taka?cs, Daniella; Nagy, Ildiko?; Bombicz, Petra; Egyed, Orsolya; Jemnitz, Katalin; Riedl, Zsuzsanna; Molna?r, Jo?zsef; Amaral, Leonard; Hajo?s, Gyo?rgy; Bioorganic and Medicinal Chemistry; vol. 20; 14; (2012); p. 4258 – 4270;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.92-30-8

92-30-8, A solution of2- (trifluoromethyl)-lOH-phenothiazine (2.04g, 7.6mmol) and DMF (16mL) was mixed with CS2C03 (7.5g, 22.9mmol) and l-bromo-3-chloropropane (1.1 mL, 11.5mmol). The reaction mixture was heated at 65 C for 12h. Once no starting material was observed by analytical LCMS, EtOAC (250mL) and brine (250mL) were added. The organic layer was separated, and the aqueous layer was washed with EtOAC (3 chi l00mL). The combined organic extracts were washed with brine (2 chi lOOmL), dried over MgSO iota, and concentrated to afford the title compound.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 2-(Trifluoromethyl)-10H-phenothiazine.

Reference£º
Patent; INCEPTION 1, INC.; CHEN, Austin, Chih-Yu; SCOTT, Jill, Melissa; STEARNS, Brian, Andrew; STOCK, Nicholas, Simon; TRUONG, Yen, Pham; WO2013/43744; (2013); A2;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

It is a common heterocyclic compound, the thiazines compound, 2-(Trifluoromethyl)-10H-phenothiazine, cas is 92-30-8 its synthesis route is as follows.

General procedure: A stirred mixture of phenothiazine (100 mg, 0.5 mmol),3,5-dimethylphenol (183 mg, 1.5 mmol), and K2CO3 (69 mg,0.5 mmol) in ODCB (1.5 mL) was heated to 130 oC for 6 h under O2 balloon atmosphere. After the usual aqueous extractive workup and column chromatographic purification process (hexanes/EtOAc, 20:1) para-3a (103 mg, 64%) and ortho-3a (34 mg, 21%) were obtained as white solids. Other compounds were synthesized similarly, and the spectroscopic data of 3a-3m and the sulfoxide of 3g are as follows.

92-30-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,92-30-8 ,2-(Trifluoromethyl)-10H-phenothiazine, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Yu, Jin; Moon, Hye Ran; Kim, Su Yeon; Kim, Jae Nyoung; Bulletin of the Korean Chemical Society; vol. 36; 11; (2015); p. 2765 – 2768;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

It is a common heterocyclic compound, the thiazines compound, 2-(Trifluoromethyl)-10H-phenothiazine, cas is 92-30-8 its synthesis route is as follows.

II-4 (20g, 75mmol) a 100mL reaction flask was added DMF (60mL) was stirred and dissolved, was added potassium carbonate (15.5g, 113mmol), stirred at 60¡ãC , portionwise Intermediate III-5 (17.5g , 79mmol), the reaction after 1h, TLC analysis showed completion of the reaction (developing solvent, ethyl acetate: petroleum ether = 1: 3). The reaction solution was poured into 200ml cold water, with stirring, solid precipitated out.Filter cake was washed with water, and dried to give brown crude solid.The crude product was recrystallized from ethanol to give slightly yellow solid 30.0g. Purity 98.8percent (HPLC normalization method), a yield of 88.3percent.ESI-MS ([M + H] +): 453.0.

92-30-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,92-30-8 ,2-(Trifluoromethyl)-10H-phenothiazine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Tianjin Pharmaceutical Institute Co., Ltd.; Liu Ying; Liu Dengke; Mu Shuai; Yue Nan; Gong Min; Zhi Shuang; Liu Changxiao; (25 pag.)CN104230848; (2017); B;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Name is 2-(Trifluoromethyl)-10H-phenothiazine, as a common heterocyclic compound, it belongs to thiazines compound, and cas is 92-30-8, its synthesis route is as follows.

1 -Bromo-3-chloropropane (37.68 g, 200 mmol) was added to 2-(trifluoromethyl)- l0i7-phenothiazine (26.7 g, 100 mmol) and Cs2CC>3 (65.6 g, 200 mmol) in DMF (130 mL). The mixture was stirred at 30 C for 48 h and then heated to 80 C for 2 h. The mixture was cooled to rt then H20 was added. The mixture was extracted with PE three times (200 mL x 3). The combined organic phase was washed with brine, dried over Na2S04, and concentrated in vacuo. The residue was purified by column chromatography (PE 100%, PE:EtOAc = 60: 1) to get 10.8 g pure and 19 g crude. LC-MS: Rt = 2.29 min; ESI, m/z 344 [M+l]+.

92-30-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,92-30-8 ,2-(Trifluoromethyl)-10H-phenothiazine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; CAMP4 THERAPEUTICS CORPORATION; BUMCROT, David, A.; SEHGAL, Alfica; HERTZOG, Donald L.; (172 pag.)WO2019/195789; (2019); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem