Category: 92-30-8

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, as follows.92-30-8

92-30-8, General procedure: To a mixture of sodium hydride suspension (60percent, 0.26 g, 6.67 mmol) and phenothiazine derivative in abs. THF (50 cm3) was added the appropriate 3-aryltetrazolo[1,5-a]pyridin-4-ium tetrafluoroborate (1) in portions over 20 min, and the mixture was stirred at room temperature for 2 days. After evaporation of the reaction mixture, the residue was dissolved in a 1:1 mixture of EtOAc:water (50 cm3) and the solid product was filtered off. The aqueous mother liquor was extracted with EtOAc (thrice) and the organic phase was dried over anhydrous Na2SO4, filtered and evaporated. The combined organic solvent was evaporated, the residue was washed with diethyl ether then it was recrystallized from ethyl acetate – unless otherwise stated – to give the product.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 92-30-8, We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Taka?cs, Daniella; Nagy, Ildiko?; Bombicz, Petra; Egyed, Orsolya; Jemnitz, Katalin; Riedl, Zsuzsanna; Molna?r, Jo?zsef; Amaral, Leonard; Hajo?s, Gyo?rgy; Bioorganic and Medicinal Chemistry; vol. 20; 14; (2012); p. 4258 – 4270;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials.92-30-8,A new synthetic method of this compound is introduced below.92-30-8

General procedure: A stirred mixture of phenothiazine (100 mg, 0.5 mmol),3,5-dimethylphenol (183 mg, 1.5 mmol), and K2CO3 (69 mg,0.5 mmol) in ODCB (1.5 mL) was heated to 130 oC for 6 h under O2 balloon atmosphere. After the usual aqueous extractive workup and column chromatographic purification process (hexanes/EtOAc, 20:1) para-3a (103 mg, 64percent) and ortho-3a (34 mg, 21percent) were obtained as white solids. Other compounds were synthesized similarly, and the spectroscopic data of 3a-3m and the sulfoxide of 3g are as follows.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 2-(Trifluoromethyl)-10H-phenothiazine.

Reference£º
Article; Yu, Jin; Moon, Hye Ran; Kim, Su Yeon; Kim, Jae Nyoung; Bulletin of the Korean Chemical Society; vol. 36; 11; (2015); p. 2765 – 2768;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

92-30-8,The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a downstream synthesis route of the compound 92-30-8

92-30-8, Compound 27; 10-[2-(N-Boc-4-piperidyl)ethyl]-2-trifluoromethylphenothiazine; To a stirred solution of 2-trifluoromethylphenothizine 1 (0.9 Ig, 3.42 mmol), sodium hydride (0.2g, 4.0 mmol) in DME (20 mL) at 90¡ãC was added N-Boc- 4-(2-bromoethyl)piperidine 26 (1.Og, 3.42 mmol) dropwise under an atmosphere of argon. The reaction mixture was stirred for 12h at reflux temperature. The reaction mixture was filtered, and filtrate was concentrated under vacuum. The residue was partitioned between ethyl acetate (25 mL) and brine (1OmL). The organic layer was dried over anhydrous sodium sulphate, filtered, and evaporated. The resulting residue was purified by column chromatography (8:2 n-hexane : ethyl acetate) on silica gel to give phenothiazine derivative 27 (0.3 g, 18percent) as a foam. MS(ESI): m/z 479(M+H).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 2-(Trifluoromethyl)-10H-phenothiazine.

Reference£º
Patent; IMMUNE CONTROL, INC.; WO2008/27521; (2008); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 92-30-8

To a solution of 2-(trifluoromethyl)-10H-phenothiazine (5.0g, 18.8mmol) and DMF (15mL) at RT was added finely powdered KOH (2.1g, 37.5mmol) and (¡À)-epibromohydrin (3.9mL, 48.9mmol). The reaction mixture was stirred at RT for 48h. Once no starting material was observed by analytical LCMS, EtOAC (250mL) and brine (250mL) were added. The organic layer was separated, and the aqueous layer was washed with EtOAC (3 chi lOOmL). The combined organic extracts were washed with brine (2 chi lOOmL), dried over MgSOzi, and concentrated to afford the title compound

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,92-30-8,2-(Trifluoromethyl)-10H-phenothiazine,its application will become more common.

Reference£º
Patent; INCEPTION 1, INC.; CHEN, Austin, Chih-Yu; SCOTT, Jill, Melissa; STEARNS, Brian, Andrew; STOCK, Nicholas, Simon; TRUONG, Yen, Pham; WO2013/43744; (2013); A2;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a downstream synthesis route of the compound 92-30-8,92-30-8

General procedure: To a solution of hydroxy compounds, sulfhydryl compounds oramino compounds (1.0 eq) and propargyl bromide (1.2 eq) inacetone (20 ml) was added NaOH (1.5 eq), the mixturewas refluxedfor about 6 h. Upon completion, the residue was purified withcolumn chromatography (hexane:EtOAc 7:1) to obtain analogue13a~13m. Sulfonyl chlorides (1.0 eq) and propynylamine (1.2 eq) inCH2Cl2 (20 ml) was added Et3N (1.5 eq), the mixture was stirred atroom temperature for about 6 h. Upon completion, the residue waspurified with column chromatography (hexane:EtOAc 9:1) toobtain analogue 13n~13o.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 92-30-8.

Reference£º
Article; Fu, Dong-Jun; Li, Ping; Wu, Bo-Wen; Cui, Xin-Xin; Zhao, Cheng-Bin; Zhang, Sai-Yang; European Journal of Medicinal Chemistry; vol. 165; (2019); p. 309 – 322;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2-(Trifluoromethyl)-10H-phenothiazine,92-30-8, This compound has unique chemical properties. The synthetic route is as follows.,92-30-8

92-30-8, General procedure: To a stirred solution of phenothiazine or 2-(trifluoromethyl)-10H-phenothiazine (3 mmol) in dichloromethane (20 mL), K2CO3 (5 mmol) and propargyl bromide (5 mmol) were added carefully and the reaction mixture was refluxed for 7 h. After the reaction, the system was concentrated under vacuum, the residue was dissolved in EtOAc (40 mL) and washed by pure water and brine, and dried over anhydrous Na2SO4 and concentrated under vacuum to afford crude products 8a-8b, which were used in the next reaction without further purification.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 92-30-8.

Reference£º
Article; Zhang, Jun-Xia; Guo, Jiao-Mei; Zhang, Ting-Ting; Lin, Hong-Jun; Qi, Nai-Song; Li, Zhen-Guo; Zhou, Ji-Chun; Zhang, Zhen-Zhong; Molecules; vol. 23; 6; (2018);,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, as follows.92-30-8

92-30-8, General procedure: A stirred mixture of phenothiazine (100 mg, 0.5 mmol),3,5-dimethylphenol (183 mg, 1.5 mmol), and K2CO3 (69 mg,0.5 mmol) in ODCB (1.5 mL) was heated to 130 oC for 6 h under O2 balloon atmosphere. After the usual aqueous extractive workup and column chromatographic purification process (hexanes/EtOAc, 20:1) para-3a (103 mg, 64percent) and ortho-3a (34 mg, 21percent) were obtained as white solids. Other compounds were synthesized similarly, and the spectroscopic data of 3a-3m and the sulfoxide of 3g are as follows.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 92-30-8, and friends who are interested can also refer to it.

Reference£º
Article; Yu, Jin; Moon, Hye Ran; Kim, Su Yeon; Kim, Jae Nyoung; Bulletin of the Korean Chemical Society; vol. 36; 11; (2015); p. 2765 – 2768;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

92-30-8 A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

General procedure: A stirred mixture of phenothiazine (100 mg, 0.5 mmol),3,5-dimethylphenol (183 mg, 1.5 mmol), and K2CO3 (69 mg,0.5 mmol) in ODCB (1.5 mL) was heated to 130 oC for 6 h under O2 balloon atmosphere. After the usual aqueous extractive workup and column chromatographic purification process (hexanes/EtOAc, 20:1) para-3a (103 mg, 64%) and ortho-3a (34 mg, 21%) were obtained as white solids. Other compounds were synthesized similarly, and the spectroscopic data of 3a-3m and the sulfoxide of 3g are as follows.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 92-30-8 reaction routes.

Reference£º
Article; Yu, Jin; Moon, Hye Ran; Kim, Su Yeon; Kim, Jae Nyoung; Bulletin of the Korean Chemical Society; vol. 36; 11; (2015); p. 2765 – 2768;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.92-30-8

92-30-8, 2-Trifluoromethylphenothiazine (2.00 g, 7.4831 mmol) was placed in a 500 mL flask, THF (100 mL) dried overanhydrous K2CO3 was added, and then 60% NaH was added sequentially under N2 protection. Mineral oil(1.1973 g, 29.9323 mmol) and 1-bromo-3-chloropropane (2.9601 mL, 29.9323 mmol) were refluxed overnightat a bath temperature of 65 C. After cooling to room temperature, the reaction mixture was poured into EtOAc EtOAc (EtOAc)EtOAc. Ethylacetate (50 mL) was added to dissolve, and silica gel powder (20 g) was added to the solution to dryness, and theresidue was applied to a silica gel column, eluted with ethyl acetate and petroleum ether, and the product wascollected, dried, and dried in vacuo. Product 2-10 (4.9444 g, yield 69.8%).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 2-(Trifluoromethyl)-10H-phenothiazine.

Reference£º
Patent; Dalian University of Technology; Li Gaoquan; Xie Aiyun; Zhang Cuifang; Chen Maofen; (23 pag.)CN104829554; (2018); B;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem

92-30-8,A common heterocyclic compound, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Compound 2; 10-(3-Chloropropyl)-2-trifluoromethylphenothiazine; To a stirred solution of 2-trifluoromethyl phenothiazine (compound 1) (2g, 7.49 mmol) and sodium hydride (0.5 g, 10.42 mmol) in dry toluene (30 mL) was added l-bromo-3-chloropropane (1.57g, 10 mmol). The reaction mixture was stirred for 18 hours at 110 C under an atmosphere of argon. The solution was cooled to room temperature and poured into an ice- water mixture, the crude product was extracted with ethyl acetate (3×50 mL) and the combined organic phase dried over anhydrous sodium sulphate. Final purification was performed by column chromatography (9:1 hexane: ethyl acetate) on silica gel to give 10-(3- chloropropyl)- 2-trifluoromethylphenothiazine (1.5 g, 58% ) as a solid.

The chemical industry reduces the impact on the environment during synthesis, 92-30-8,2-(Trifluoromethyl)-10H-phenothiazine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; IMMUNE CONTROL, INC.; WO2008/27521; (2008); A1;,
Thiazine – an overview | ScienceDirect Topics
Thiazine | C4H5NS – PubChem